Agency Listing Information

/ Thermostat Control

This appliance is intended for use in commercial establishments only.

This appliance is intended to hold pre-heated food for human consumption. No other use is recommended or authorized by the manufacturer or its agents.

Operators of this appliance must be familiar with the appliance use, limitations and associated restrictions. Operating instructions must be read and understood by all persons using or installing this appliance.

Cleanliness of this appliance is essential to good sanitation. Read and follow all included cleaning instructions and schedules to ensure the safety of the food product.

Disconnect this appliance from electrical power before performing any maintenance or servicing.

This appliance is not jet stream approved. Do not direct water jet or steam jet at this appliance, or at any control panel or wiring. Do not splash or pour water on, in or over any controls, control panel or wiring.

Exposed surfaces of this appliance can be hot to the touch and may cause burns.

Do not operate this appliance if the control panel is damaged. Call your Authorized Wells Service Agent for service.

The technical content of this manual, including any wiring diagrams, schematics, parts breakdown illustrations and/or adjustment procedures, is intended for use by qualified technical personnel.

Any procedure which requires the use of tools must be performed by a qualified technician.

This manual is considered to be a permanent part of the appliance. This manual and all supplied instructions, diagrams, schematics, parts breakdown illustrations, notices and labels must remain with the appliance if it is sold or moved to another location.

This appliance is made in the USA. Unless otherwise noted, this appliance has American sizes on all hardware.

WARNING:

SHOCK HAZARD

All servicing requiring access to non-insulated electrical components must be performed by a factory authorized technician.

DO NOT open any access panel which requires the use of tools. Failure to

follow this warning can result in severe electrical shock.

CAUTION:

RISK OF

DAMAGE

DO NOT connect or energize this appliance until all installation instructions are read and followed. Damage to the appliance may result if these instructions are not followed.

CAUTION:

HOT SURFACE

Exposed surfaces can be hot to the touch and may cause burns.

CT Warmers

001 p/n 303305 OpManual

Refer to the product nameplate for the specific appliance for agency listings. In general:

This appliance conforms to NSF Standard 4 for sanitation only if installed in accordance with the supplied Installation Instructions.

UL Listed warmers are UListed under UL File E6070.

STD 4

E6070

Listed

SMPT, TMPT, SW-10T specifications

The Wells SW-10T, TMPT, and SMPT represent a range of innovative and efficient foodservice equipment designed for commercial kitchen environments. These models are particularly renowned for their versatility and user-friendly features, making them popular choices among restaurant and foodservice operators.

The Wells SW-10T is a countertop food warmer that boasts an impressive capacity with a sleek stainless steel construction. Its design not only enhances durability but also provides an aesthetic appeal that fits seamlessly into any kitchen design. A standout feature of the SW-10T is its adjustable temperature control, allowing operators to maintain optimal serving temperatures, ensuring that meals are always served hot and appetizing. Additionally, it features dual heaters that provide consistent heat and minimize cold spots, which is crucial for safety in foodservice operations.

The TMPT (Turbo Melt Pro) model takes warming technologies a step further. This unit is equipped with a high-performance heat system that delivers rapid heating, significantly reducing wait times for food preparation. The TMPT is particularly useful for melting cheese or warming other toppings, featuring an adjustable thermostat for precise temperature control. Its compact design allows for easy placement on countertops, enhancing convenience in busy kitchen settings.

The SMPT (Smart Melt Pro) shares similar capabilities but integrates advanced smart technology. This model features programmable settings and digital temperature readouts, providing operators with greater control over the melting process. The SMPT is designed with energy efficiency in mind, utilizing insulation materials that minimize heat loss and reduce energy consumption. It also incorporates safety features such as automatic shut-off functions, ensuring peace of mind for operators.

All three models prioritize ease of cleaning and maintenance, with removable components and smooth surfaces that resist food buildup. They are specifically designed to handle the rigorous demands of commercial kitchens while ensuring user safety and operational efficiency. These Wells models also provide versatility for various culinary applications, from holding sauces and gravies to warming bread and desserts.

In conclusion, the Wells SW-10T, TMPT, and SMPT models exemplify the fusion of functionality and innovation in foodservice equipment. Their advanced heating technologies, user-friendly designs, and energy-efficient operation make them essential tools for professionals seeking to enhance their kitchen capabilities and deliver quality food consistently. Whether for melting cheese or keeping dishes warm, these units prove invaluable in any fast-paced culinary environment.