Installation, Risk Personal Injury Property Damage

UNPACKING & INSPECTION

Carefully read all instructions in this manual before starting any installation.

Carefully remove the hood from the carton.

IMPORTANT: Appliance weighs 92 lbs (42.7 kg). Use appropriate care when removing from carton and installing on conveyor warmer.

Remove all protective plastic film, packing materials and accessories from the hood before connecting electrical power or otherwise performing any installation procedure.

Read and understand all labels and diagrams attached to the hood.

Carefully account for all components and accessories before discarding packing materials. Store all accessories in a convenient place for later use.

COMPONENTS:

HIGH EFFICIENCY FILTER CHARCOAL FILTER

COMPONENTS SHIPPED SEPARATELY CANOPY (2 ea)

ADAPTER TOP

SETUP

The conveyor-style warmer requires an adapter top (shipped separately) for mounting the hood. Place adapter top on warmer before setting hood in place. Carefully place hood on top of warmer. Orient hood so that power switch is on the same side as the power switch of the warmer. Center hood over the body of the warmer as shown in Fig. 2 below:

Fig. 2 Hood installation on warmer

Check high efficiency filter and charcoal filter for proper installation. Charcoal filter slides into clips on the high efficiency filter. Airflow marks must point "up".

Attach entry and exit canopies to pins on sides of hood. Canopies are interchangeable and may be mounted at either end.

Maintain required clearances of at least 6" between the appliance and adjacent combustible surfaces.

INSTALLATION

NOTE: DO NOT discard the carton or other packing materials until you have inspected the hood for hidden damage and tested it for proper operation.

Refer to SHIPPING DAMAGE CLAIM PROCEDURE on the inside front cover of this manual.

WARNING!

Risk of Personal Injury

Installation procedures must be performed by a qualified technician with full knowledge of all applicable electrical codes. Failure can result in personal injury and property damage.

CAUTION!

Risk of

Personal Injury

and Property

Damage

Unplug conveyor warmer and allow to cool before beginning installation.

IMPORTANT:

Maintain required clearances of at least 6" between the appliance and adjacent combustible surfaces.

Avoid storing flammable or combustible materials in, on or near the appliance.

WVSW specifications

Wells WVSW is an innovative integrated water and wastewater system that has been making waves in environmental management and resource conservation. Located in the heart of a vibrant community, it represents a commitment to sustainability while providing essential services to residents and businesses alike.

One of the standout features of Wells WVSW is its advanced water treatment technology. Utilizing a multi-barrier approach, the facility ensures the highest quality of potable water through a combination of coagulation, sedimentation, filtration, and disinfection processes. This advanced treatment not only meets but often exceeds government regulations, ensuring that the community has access to safe and clean drinking water.

Alongside its water treatment capabilities, Wells WVSW is equally dedicated to efficient wastewater management. The wastewater treatment plants are designed with state-of-the-art biological treatment processes, including activated sludge systems, membrane bioreactors, and advanced oxidation techniques. These technologies minimize the environmental impact by significantly reducing pollutants before the treated water is released back into the ecosystem or repurposed for irrigation and industrial use.

A key characteristic of Wells WVSW is its emphasis on energy efficiency and resource recovery. The facility employs energy-efficient equipment and processes to reduce operational costs and carbon footprint. Additionally, Wells WVSW actively engages in resource recovery initiatives, including the production of biogas from organic waste, which can be used as renewable energy, thereby promoting a circular economy within the community.

Smart technology integration further enhances the operational efficiency of Wells WVSW. The facility utilizes real-time monitoring and automation systems, allowing for proactive management and rapid response to any potential issues. This technological framework not only optimizes resource allocation but also improves service delivery and reliability.

Community engagement is also a pillar of Wells WVSW’s operations. The organization prioritizes transparency and communication, providing residents with access to information on water quality, usage, and sustainability practices. Educational programs and outreach initiatives encourage local participation in conservation efforts, fostering a culture of environmental stewardship.

In conclusion, Wells WVSW stands as a paragon of modern water and wastewater management. Through its advanced technologies, commitment to sustainability, and community involvement, it paves the way for a resilient and environmentally-conscious future, ensuring that essential water services meet the needs of present and future generations.