Wells WVSW owner manual Electrical Installation

Page 8

INSTALLATION (continued)

WARNING!

Electric

Shock hazard

All servicing requiring access to non-insulated electrical components must be performed by a factory authorized technician.

DO NOT open any access panel which requires the use of tools. Failure to follow this warning can result in severe electrical shock.

CAUTION!

Electrical Shock

Hazard

The ground prong of the power cord is part of a system designed to protect you against electric shock in the event of internal damage. DO NOT cut the ground prong (large round prong) or twist a blade to make the plug fit an existing receptacle.

IMPORTANT:

Contact a licensed electrician to install and connect electrical power to the appliance.

IMPORTANT: Damage due to being connected to the wrong voltage or phase is NOT covered by warranty.

ELECTRICAL INSTALLATION

Refer to the nameplate. Verify the electrical power source. Voltage and phase must match the nameplate specifications. Plugging the hood into the wrong voltage can severely damage the unit .

Your hood is equipped with a grounded electrical cord. This cord must be plugged into a properly grounded NEMA 5-15R (120V) or NEMA 6-15R (208/240V) single phase receptacle.

Fig. 3 Electrical Plug and Receptacle Configuration

6

Image 8
Contents Model Wvsw Ventless Hood Limited Warranty Statement Introduction Table of ContentsSpecifications Features & Operating Controls Agency Listing Information DescriptionPrecautions and General Information Hot SurfaceInstallation SetupRisk Personal Injury Property Damage Unpacking & InspectionInstallation Electrical InstallationOperating Controls Filter Removal and InstallationOperation Cleaning Instructions ToolsTroubleshooting Suggestions Symptom Probable Cause Corrective ActionService Insrtuctions Vacuum DiagramParts & Service Wells Manufacturing Co

WVSW specifications

Wells WVSW is an innovative integrated water and wastewater system that has been making waves in environmental management and resource conservation. Located in the heart of a vibrant community, it represents a commitment to sustainability while providing essential services to residents and businesses alike.

One of the standout features of Wells WVSW is its advanced water treatment technology. Utilizing a multi-barrier approach, the facility ensures the highest quality of potable water through a combination of coagulation, sedimentation, filtration, and disinfection processes. This advanced treatment not only meets but often exceeds government regulations, ensuring that the community has access to safe and clean drinking water.

Alongside its water treatment capabilities, Wells WVSW is equally dedicated to efficient wastewater management. The wastewater treatment plants are designed with state-of-the-art biological treatment processes, including activated sludge systems, membrane bioreactors, and advanced oxidation techniques. These technologies minimize the environmental impact by significantly reducing pollutants before the treated water is released back into the ecosystem or repurposed for irrigation and industrial use.

A key characteristic of Wells WVSW is its emphasis on energy efficiency and resource recovery. The facility employs energy-efficient equipment and processes to reduce operational costs and carbon footprint. Additionally, Wells WVSW actively engages in resource recovery initiatives, including the production of biogas from organic waste, which can be used as renewable energy, thereby promoting a circular economy within the community.

Smart technology integration further enhances the operational efficiency of Wells WVSW. The facility utilizes real-time monitoring and automation systems, allowing for proactive management and rapid response to any potential issues. This technological framework not only optimizes resource allocation but also improves service delivery and reliability.

Community engagement is also a pillar of Wells WVSW’s operations. The organization prioritizes transparency and communication, providing residents with access to information on water quality, usage, and sustainability practices. Educational programs and outreach initiatives encourage local participation in conservation efforts, fostering a culture of environmental stewardship.

In conclusion, Wells WVSW stands as a paragon of modern water and wastewater management. Through its advanced technologies, commitment to sustainability, and community involvement, it paves the way for a resilient and environmentally-conscious future, ensuring that essential water services meet the needs of present and future generations.