Wells WVSW owner manual Operation, Operating Controls, Filter Removal and Installation

Page 9

OPERATING CONTROLS

Controls include a lighted POWER SWITCH and an amber REPLACE FILTER indicator light.

Press POWER SWITCH to ON anytime conveyor warmer is operating.

When power is first turned on, the REPLACE FILTER light will glow.

As the fan comes up to speed and air flow is established, the REPLACE FILTER light will go out.

If the REPLACE FILTER light does not go out, the filters must be replaced. However, the fan will continue to operate when the REPLACE FILTER light is lit.

FILTER REMOVAL AND INSTALLATION

Disconnect power from hood and conveyor warmer before servicing filters.

Remove screw from filter access panel on front (operator's) side of hood. Slide filter pack (high efficiency filter and charcoal filter) from filter chamber.

Slide new filter pack into filter chamber. Be sure airflow markings on both filters point "up".

Close access panel and reinstall screw.

IMPORTANT:

Filters are disposable. Never attempt to wash either filter.

Filters will absorb water if washed, causing food contamination and possible equipment damage.

Fig. 5 Filter Installation

OPERATION

Fig. 4 Operating Controls

CAUTION!

Personal Injury

Hazard

Disconnect power from hood and conveyor warmer before servicing filters.

IMPORTANT:

DO NOT store anything on top of the hood.

DO NOT block the exhaust opening.

IMPORTANT:

Both the high efficiency and charcoal filters must be in place at all times during operation.

7

Image 9
Contents Model Wvsw Ventless Hood Limited Warranty Statement Table of Contents SpecificationsIntroduction Features & Operating Controls Description Agency Listing InformationHot Surface Precautions and General InformationSetup InstallationRisk Personal Injury Property Damage Unpacking & InspectionElectrical Installation InstallationFilter Removal and Installation OperationOperating Controls Tools Cleaning InstructionsSymptom Probable Cause Corrective Action Troubleshooting SuggestionsVacuum Diagram Service InsrtuctionsWells Manufacturing Co Parts & Service

WVSW specifications

Wells WVSW is an innovative integrated water and wastewater system that has been making waves in environmental management and resource conservation. Located in the heart of a vibrant community, it represents a commitment to sustainability while providing essential services to residents and businesses alike.

One of the standout features of Wells WVSW is its advanced water treatment technology. Utilizing a multi-barrier approach, the facility ensures the highest quality of potable water through a combination of coagulation, sedimentation, filtration, and disinfection processes. This advanced treatment not only meets but often exceeds government regulations, ensuring that the community has access to safe and clean drinking water.

Alongside its water treatment capabilities, Wells WVSW is equally dedicated to efficient wastewater management. The wastewater treatment plants are designed with state-of-the-art biological treatment processes, including activated sludge systems, membrane bioreactors, and advanced oxidation techniques. These technologies minimize the environmental impact by significantly reducing pollutants before the treated water is released back into the ecosystem or repurposed for irrigation and industrial use.

A key characteristic of Wells WVSW is its emphasis on energy efficiency and resource recovery. The facility employs energy-efficient equipment and processes to reduce operational costs and carbon footprint. Additionally, Wells WVSW actively engages in resource recovery initiatives, including the production of biogas from organic waste, which can be used as renewable energy, thereby promoting a circular economy within the community.

Smart technology integration further enhances the operational efficiency of Wells WVSW. The facility utilizes real-time monitoring and automation systems, allowing for proactive management and rapid response to any potential issues. This technological framework not only optimizes resource allocation but also improves service delivery and reliability.

Community engagement is also a pillar of Wells WVSW’s operations. The organization prioritizes transparency and communication, providing residents with access to information on water quality, usage, and sustainability practices. Educational programs and outreach initiatives encourage local participation in conservation efforts, fostering a culture of environmental stewardship.

In conclusion, Wells WVSW stands as a paragon of modern water and wastewater management. Through its advanced technologies, commitment to sustainability, and community involvement, it paves the way for a resilient and environmentally-conscious future, ensuring that essential water services meet the needs of present and future generations.