Auto tuning
4 1 2 3
B
ENGLISH
1 Set the input function to “TUNER”. | TUNER |
2 | Watching the display, press the BAND | BAND |
button to select the desired band (AM or |
|
FM).
Manual tuning
1Set the input function to “TUNER”.
2Watching the display, press the BAND button to select the desired band (AM or FM).
3 | Press the MODE button to set the auto | MODE | ||
tuning mode. |
|
| ||
| Lit |
|
|
|
| AUTO | CH |
|
|
|
| TUNED |
|
|
|
|
| TUNER | |
4 | Press the TUNING UP or |
| TUNING | |
DOWN button. | DOWN | UP | ||
|
| |||
•Automatic searching begins, then stops when a station is tuned in.
NOTE:
•When in the auto tuning mode on the FM band, the “STEREO” indicator lights on the display when a stereo broadcast is tuned in. At open frequencies, the noise is muted and the “TUNED” and “STEREO” indicators turn off.
3Press the MODE button to set the manual tuning mode. Check that the display’s “AUTO” indicator turns off.
4Press the TUNING UP or DOWN button to tune in the desired station.
The frequency changes continuously when the button is held in.
NOTE:
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the “STEREO” indicator turns off.
25