DeLonghi ETAM36.365 manual Making Coffee

To display, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the scrolling arrow (< or >) (fig. 9) until “Statistics” is displayed;

3.Press the button;

4.By pressing the scrolling arrow (< or >) (fig. 9), you can

check:

-how many coffees have been made;

-the total number of cappuccinos and milk based coffees;

-the total number of litres of water delivered;

-how many times the machine has been descaled;

-how many times the water softener filter has been re- placed.

5. Press the MENU/ESC button twice to exit the menu.

MAKING COFFEE

Selecting the coffee taste

The appliance is set by default to make coffee with a standard taste.

You can also choose one of these tastes: Extra-mild taste

Mild taste Standard taste Strong taste Extra-strong taste

To change the taste, press the button (fig. 10) re- peatedly until the required taste is displayed.

Selecting the quantity of coffee in the cup

The appliance is set by default to make a standard quantity of coffee. To select the quantity of coffee, press the button (fig. 11) until the message corresponding to the re- quired quantity of coffee is displayed:

Coffee selected	Quantity in cup (ml)
MY COFFEE	Programmable:
	from ≃20 to ≃180
SHORT	≃40
STANDARD	≃60
LONG	≃90
EXTRA LONG	≃120

Customising the “my coffee” quantity

The appliance is set by default to automatically deliver 30 ml of “my coffee”.

To modify this quantity, proceed as follows:

1.Place a cup under the coffee spouts (fig. 12).

2.Press the button (fig. 10) until “MY COFFEE”

is displayed.

3.Press and hold the button (fig. 15) until the mes- sage “Program quantity 1 MY COFFEE” is displayed and coffee delivery begins. Release the button

4.As soon as the coffee in the cup reaches the required level,

press the button (fig. 15) again.

The quantity of coffee in the cup set has now been pro- grammed.

Adjusting the coffee mill

The coffee mill is set by default to prepare coffee correctly and should not require regulating initially.

However, if after making the first few coffees you find that the coffee is either too weak and not creamy enough or delivery is too slow (a drop at a time), this can be corrected by adjusting the grinding adjustment dial (fig. 13).

Please note!

The grinding adjustment dial must only be turned when the coffee mill is in operation.

If the coffee is delivered too slowly or

not at all, turn one click clockwise to-

wards “7”.

For fuller bodied creamier coffee, turn

one click anticlockwise towards “1” (do not turn more than one click at a time

otherwise the coffee could be delivered a drop at a time). These adjustments will only be evident after at least 2 cups of coffee have been delivered.

If this adjustment does not obtain the desired result, turn the dial another click.

Tips for a hotter coffee

For hotter coffee, you should:

•perform a rinse cycle by selecting the“Rinsing”function in the settings menu (page 10)

•warm the cups by rinsing them with hot water (using the hot water function);

•increase the coffee temperature in the settings menu

(page 11);

•Press the button to enable the cup warmer (the

symbol is displayed).

Making coffee using coffee beans

Important!

Do not use caramelised or candied coffee beans as they could stick to the coffee mill and make it unusable.

1.Fill the container with coffee beans (fig. 14).

2.Place under the coffee spouts:

12