DeLonghi ETAM36.365 Replacing the filter, Removing the filter, Electrical connection UK only

Page 20

5.

Place the

filter in the

39

 

water tank and sub-

 

 

 

 

merge it completely for

 

 

 

 

 

 

ten seconds, tilting it to

 

 

 

enable the air bubbles

 

 

 

to escape (fig. 39).

 

 

 

6.

Insert the filter into the

 

 

 

filter housing and press

 

 

 

as far as it will go

(fig.

 

 

 

40A).

 

 

 

 

40A

7. Close the tank with the

 

 

 

lid (fig. 40B), and then

 

 

 

replace the tank in the

 

 

 

machine.

 

 

 

 

When you install the filter,

 

 

you must notify the appliance

 

40B

of its presence.

MENU/ESC

 

8.

Press

the

 

 

 

button

to

enter

the

 

 

 

menu;

 

 

 

 

 

9.Press the scrolling arrow (< or >) (fig. 9) until “Install filter” is displayed.

10.

Press the

button.

 

11.

“Install?” is displayed;

 

12.

Press the

button to confirm

the selection. “Wa-

 

ter delivery Press OK” is displayed.

 

13.

Position a container under the hot water spout (min. ca-

 

pacity: 100 ml).

 

 

14.

Press the

button to confirm

the selection. The

 

appliance begins hot water delivery and the message

 

“Please wait” is displayed.

 

15.

After delivery, the appliance is automatically ready to make

the next drink.

The filter is now active and you can use the coffee machine.

Replacing the filter

When the symbol “” is displayed together with the mes- sage“REPLACE FILTER”, after two months (see date indicator) or when the appliance has not been used for 3 weeks, you should replace the filter:

1.Extract the tank and exhausted filter;

2.Remove the new filter from the packaging and proceed following steps from 2 to 6 of the paragraph before.

3.Position a container with a minimum capacity of 100 ml under the hot water spout.

4.Press the MENU/ESC button to enter the menu;

5.Press < or > until “Replace filter” is displayed.

6.

Press the

button;

7.

“Confirm?” is displayed;

8.

Press the

button to confirm the selection;

9.

“Water delivery, Press OK” is displayed.

10.

Press the

button to confirm the selection. The

 

appliance begins hot water delivery and the message

 

“Please wait” is displayed.

11.After delivery, the appliance is automatically ready to make the next drink.

The new filter is now active and you can use the coffee ma- chine.

Removing the filter

If you want to use the appliance without the filter, you must remove it and notify the appliance of its removal.

Proceed as follows:

1.Extract the tank and exhausted filter;

2.Press the MENU/ESC button to enter the menu;

3.Press the scrolling arrow (< or >) (fig. 9) until “Install fil- ter, Installed” is displayed.

4.Press the button;

5.The message “Uninstall?” appears on the display;

6. Press the button to confirm and theMENU/ESC button to exit the menu.

Electrical connection (UK only)

A)If your appliance comes fitted with a plug, it will incorporate a 13 Amp fuse. If it does not fit your socket, the plug should be cut off from the mains lead, and an appropriate plug fitted, as below. WARNING: Very carefully dispose of the cut off plug after removing the fuse: do not insert in a 13 Amp socket elsewhere in the house as this could cause a shock hazard. With alternative plugs not incorporating a fuse, the circuit must be protected by a 15 Amp fuse. If the plug is a moulded-on type, the fuse cover must be re-fitted when changing the fuse using a 13 Amp Asta approved fuse to BS 1362. In the event of losing the fuse cover, the plug must NOT be used until a replacement fuse cover can be obtained from your nearest electrical dealer. The colour of the correct replacement fuse cover is that as marked on the base of the plug.

B)If your appliance is not fitted with a plug, please follow the instructions provided below:

WARNING - THIS APPLIANCE MUST BE EARTHED

 

important

green and yellow

earth

blue

NEUTRAL

brown

LIVE

As the colours of the wires in the mains lead may not correspond with the col- oured markings identifying the terminals in your plug, proceed as follows:

The green and yellow wire must be connected to the terminal in the plug marked

with the letter E or the earth symbol or coloured green or green and yel- low.

The blue wire must be connected to the terminal marked with the letter N or coloured black.

The brown wire must be connected to the terminal marked with the letter L or coloured red.

19

Page 19 Page 21
Image 20
Page 19 Page 21
Contents ETAM36AU/02.13 ETAM36.365 B2 B3 B12 B11 B10 B9 B8 A19 A14 A18 A16 A15 A17 Page 22A Contents DisposalSafety IntroductionDesignated USE Instruction for USEDescription Before USEConnecting the appliance Setting up the applianceTurning the Appliance on Turning the Appliance OFFMenu Settings Setting the temperature Setting water hardnessSetting the language Default values resetMaking Coffee Making coffee using pre-ground coffee Adjusting the amount of frothMaking Milk Based Drinks Filling and attaching the milk containerDelivering hot water Delivering HOT Water and SteamMaking milk based drinks automatically Cleaning Cleaning the spout after useCleaning the coffee grounds container Steam deliveryCleaning the drip tray and condensate tray Cleaning the inside of the coffee machineCleaning the water tank Cleaning the coffee spoutsDescaling Cleaning the milk containerCleaning the hot water/steam nozzle Setting Water Hardness Installing the filterWater Softener Filter Measuring water hardnessElectrical connection UK only Replacing the filterRemoving the filter Displayed Messages Water deliveryTroubleshooting

ETAM36.365 specifications

The DeLonghi ETAM36.365 is an innovative fully automatic coffee machine designed to deliver the perfect cup of coffee with convenience and versatility. With its sleek, modern design, the ETAM36.365 not only enhances the aesthetics of any kitchen but also offers an array of features that appeal to coffee enthusiasts and casual drinkers alike.

One of the standout features of the DeLonghi ETAM36.365 is its customizability. Users can easily adjust the strength, volume, and temperature of their coffee, allowing for a personalized experience with each brew. The machine also boasts a unique milk frother, which offers the ability to create creamy frothed milk for cappuccinos and lattes, making it perfect for those who enjoy specialty coffee drinks.

Equipped with advanced brewing technology, the ETAM36.365 utilizes a highly efficient pump and a thermoblock heating system. This ensures quick heat-up times and consistent brewing temperatures, resulting in optimal extraction of flavors from the coffee grounds. This attention to detail guarantees that every cup is rich in flavor.

The coffee machine features a built-in grinder made from stainless steel, which offers multiple grinding settings. This allows users to select their preferred grind size, enhancing the overall flavor profile of their coffee. The grinder is capable of accommodating both whole beans and pre-ground coffee, offering flexibility for different preferences.

Cleaning and maintenance are simplified with the ETAM36.365. The machine has a removable brewing unit that can be easily rinsed and cleaned, while the automatic cleaning cycles ensure that the internal components are maintained without hassle. Additionally, the water tank and milk container are removable, making it easy to refill and clean.

The DeLonghi ETAM36.365 also incorporates an intuitive control panel, featuring an LCD display that guides users through the brewing process. This user-friendly interface allows quick adjustments to settings and options, making it accessible even to those unfamiliar with advanced coffee machines.

Ultimately, the DeLonghi ETAM36.365 embodies the essence of high-quality Italian craftsmanship combined with cutting-edge technology. Whether making a simple espresso or a complex milk-based beverage, this machine is designed to satisfy a range of coffee cravings, making it a worthwhile addition to any coffee lover's collection.
Top Page Image Contents