DeLonghi ESAM6600 manual Start Time, AUTO-START no, Changing and Setting the Menu Parameters

Page 18

16.3Cleaning the milk container Proceed as follows:

• Remove the milk spout (1) and intake tube (2).

• Remove the froth regulator (3) by pulling it outwards (see figure)

• Wash all the components thoroughly with hot soapy water. Make sure there is no milk residue inside the two holes in the lid of the milk con- tainer,indicated by the arrows in the figure,or in the groove (4) of the froth regulator.

• Replace the froth regulator, intake tube and milk spout back in the milk container lid.

4

3

1

2

17 CHANGING AND SETTING THE MENU PARAMETERS

After pressing the button, when the appliance is ready, you can use the internal menu to modify the fol- lowing parameters and functions:

Clock

Auto-start time

Auto start ON/OFF

Descaling process

Coffee temperature

Length of time the appliance remains on

Water hardness

Resetting factory default values

Washing procedure

BEEP ON/OFF

Note: the last line of the display is the guide to the function buttons.

17.1 Setting the clock

 

 

To set the clock, proceed as follows:

 

 

• Press the P button, then press the

button (corresponding to the

symbol flashing on the display)

repeatedly until the menu arrow is on:

 

 

CLOCK 00:00

Press the button (corresponding to the SET symbol flashing on the display) to set the time on the clock. (If you hold the button down, the time is changed rapidly.)

Press the OK button to confirm the value.

Press the P button (corresponding to the ESC symbol flashing on the display) to exit programming mode

or to change other parameters.

Note: to display the time with the appliance off, press any button. The time will be displayed for five minutes.

17.2 Setting auto-start time

This function programs the time the appliance will come on automatically and be ready for use.

Make sure the clock on the appliance is set as described above.

Press the P button then press the button (corresponding to the symbol flashing on the display) repeatedly until the menu arrow is on:

START TIME 00:00

Press the button (corresponding to the SET symbol flashing on the display) to set the auto-start time. (If you hold the button down, the time is changed rapidly.)

Press the OK button to confirm the value.

Press the SET button again and the appliance displays:

 

AUTO-START NO

Press the

button (corresponding to the SET symbol flashing on the display) to modify the function

(the appliance displays: AUTO-START YES)

 

17

 

C o l l e c t i o n

 

 

 

 

Image 18
Contents De’Longhi America, Inc Collection Colleción Collezione L l e c t i o n L l e c i ó n L l e z i o n e L l e c t i o n L l e c i ó n L l e z i o n e Index Changing the Quantity of Coffee and Milk forP O R T a N T S a F E G U a R D S Safety Warnings Description seeControl panel Fill Tank Press OK to Install EnglishEnglish Installed Press OKRinsing Please Wait Preparing Coffee Using Coffee Beans and Useful TipsHeating UP Please Wait Turning on and PreheatingGround TOO Fine Adjust Mill Insert Water Spout and Press OK Empty Grounds ContainerReady PRE-GROUND Coffee Changing the Quantity of Coffee in the CUPRegulating the Coffee Mill HOT Water HOT Water Program QuantityCappuccino Container Pointer in Position Preparing Latte or Italian Macchiato CleaningItalian Macchiato Container Pointer in Position Preparing Frothed or Steamed Milk Without CoffeeCleaning the infuser Cleaning and MaintenanceCleaning the coffee maker Milkfor ProgramquantityCorrect Incorrect Changing and Setting the Menu Parameters Start TimeAUTO-START no Descale YES DescaleDescale no Appliance in DescaleOFF After 1 Hour High TemperatureReset to Default no Water HardnessChanging the Language Beep ON/OFF activates and deactivates the beepTroubleshooting Less CoffeeProblems to be Resolved Before Calling the Service Center Problem Cause SolutionBut From Around How do you get service? What does the warranty cover?What is not covered by the warranty? How long does the coverage last?