DeLonghi ECAM26455M manual Turning the Appliance on, Turning the Appliance OFF, Menu Settings

TURNING THE APPLIANCE ON

Please note!

Before turning the appliance on, make sure the main switch on the back of the appliance is pressed (fig. 2).

Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which cannot be interrupted.

The appliance is ready for use only after completion of this cycle.

Danger of burns!

During rinsing, a little hot water comes out of the coffee spouts and is collected in the drip tray underneath.

Avoid contact with splashes of water.

•	To turn the appliance on, press the	button (fig. 7).
	The message “Heating up Please wait” is displayed.

After heating, the message “Rinsing” is displayed. As well as heating the boiler, the appliance also heats the internal circuits by circulating hot water.

The appliance has reached the required temperature when a message is displayed indicating the coffee taste and quantity.

TURNING THE APPLIANCE OFF

Each time the appliance is turned off, it performs an automatic rinse cycle which cannot be interrupted.

Danger of burns!

During rinsing, a little hot water flows from the coffee spouts. Avoid contact with splashes of water.

To turn the appliance off, press the button (fig. 7).

The appliance performs a rinse cycle, then the message “Turning off underway Please wait” is displayed and the appliance goes off.

Please note!

If the appliance is not used for an extended period, switch off the machine at the main switch (fig. 2).

Important!

To avoid damaging the appliance, never switch the appliance off at the main switch before it has been turned off using the button.

MENU SETTINGS

When you access the programming menu by pressing the MENU/ESC button, the following menu items are available:

Rinsing

Use this function to deliver hot water from the spout to heat the internal circuit and make the coffee delivered hotter.

To enable the function, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the MILK or CAPPUCCINO button (fig. 8) until

	“Rinsing” is displayed;
3.	Press the	button. The message “Confirm?” is
	displayed;
3.	Press the	button (fig. 3). Hot water flows out of
	the spout, heating the internal circuit and making the
	coffee delivered hotter.

Descale

For instructions on descaling, see page 17.

Adjust time

To adjust the time on the display, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the MILK or CAPPUCCINO button (fig. 8) until “Adjust time” is displayed;

3.Press the button (fig. 3);

4.Press the MILK or CAPPUCCINO button (fig. 8) to change the hours;

5.Press the button to confirm;

6.Press the MILK or CAPPUCCINO button (fig. 8) to change the minutes;

7.Press the button to confirm.

This sets the time. Press the MENU/ESC button to exit the menu.

Auto-off

The auto-off time can be changed so that the appliance switches off after 15 or 30 minutes, or after 1, 2 or 3 hours.

To re-programme Auto-off, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the MILK or CAPPUCCINO button (fig. 8) until “Auto-off” is displayed;

3.Press the button;

4.Press the MILK or CAPPUCCINO button (fig. 8) until the desired operation time is displayed (15 or 30 minutes, or 1, 2 or 3 hours);

5.Press the button to confirm;

6.Press the MENU/ESC button to exit the menu.

Auto-off is programmed.

Auto-start

You can set the auto-start time in order to have the appliance ready at a certain time (for example in the morning) so you can make coffee immediately.

Please note!

To enable this function, the time must already have been set correctly.

10