DeLonghi ECAM26455M manual Making Coffee

displayed;

4. Press the button to enable or disable the beep;

5. Press the MENU/ESC button to exit the menu.

Cup lighting

This function enables or disables the cup lighting. The lighting is enabled by default.

The lights come on each time coffee and drinks with milk are made and during each rinse cycle.

To disable or re-enable this function, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the MILK or CAPPUCCINO button (fig. 8) until “Cup

	lighting” is displayed.
3.	Press the	button. “ Disable?” or “ Enable?” is
	displayed;
4.	Press the	button to enable or disable the cup
	lighting;
5.	Press the MENU/ESC button to exit the menu.

Default values (reset)

This resets all menu settings and programmed quantities back to the default values (with the exception of the language which remains as previously set).

To reset the default values, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the MILK or CAPPUCCINO button (fig. 8) until “Default values” is displayed;

3.Press the ; button

4.The message “Confirm?” is displayed.

5.Press the button to confirm and exit.

Statistics function

This displays statistics relating to the machine.

To display, proceed as follows:

1.Press the MENU/ESC button to enter the menu;

2.Press the MILK or CAPPUCCINO button (fig. 8) until “Statistics” is displayed;

3.Press the button;

4.Press the MILK or CAPPUCCINO button (fig. 8) to verify: - how many coffees have been made;

- how many times the machine has been descaled; - the total number of liters of water delivered;

- how many times the water filter has been replaced; - the total number of drinks made with milk.

5.Press the MENU/ESC button twice to exit the menu.

MAKING COFFEE

Selecting the coffee taste

The appliance is set by default to make coffee with a standard taste.

You can also choose one of these tastes:

Extra-mild taste

Mild taste

Standard taste

Strong taste

Extra-strong taste

To change the taste, press the	button (fig. 9)
repeatedly until the required taste is displayed.

Selecting the quantity of coffee in the cup

The appliance is set by default to make a standard quantity of coffee.

To select the quantity of coffee, press the button (fig. 10) until the message corresponding to the required quantity of coffee is displayed:

Coffee selected	Quantity in cup (fl oz./ ml)
MY COFFEE	Programmable:
	from ≃0.68/20 to ≃6/180
espresso	≃1.35/40
STANDARD	≃2/60
LONG	≃3/90
EXTRA LONG	≃4/120

Customising the “my coffee” quantity

The appliance is set by default to automatically deliver 1 fl oz./ 30 ml of “my coffee”.

To modify this quantity, proceed as follows:

1.	Place a cup under the coffee spouts (fig. 14).
2.	Press the	button (fig. 10) until “MY COFFEE”
	is displayed.

3.Keep the button (fig. 11) pressed until the message “1 MY COFFEE Program quantity” is displayed and coffee delivery begins. Release the button.

4.As soon as the coffee in the cup reaches the required level,

press the button (fig. 11) again.

The quantity of coffee in the cup has now been programmed.

Adjusting the coffee mill

The coffee mill is preset in the factory to make coffee correctly and should not require adjusting initially.

However, if after making the first few coffees you find that the coffee is too thin and not creamy enough or that delivery is too slow (a drop at a time), this can be corrected by adjusting the grinding adjustment dial (fig. 12).

Please note!

The grinding adjustment dial must only be turned when the

12