DeLonghi ECAM23.450 manual Turning the Appliance on, Turning the Appliance OFF, Menu Settings

•To enjoy your coffee even more and improve the performance of your appliance, we re- commend installing a water softener filter as described in the section “WATER SOFTENER FILTER”. If your model is not provided with a filter, you can request one from De’Longhi Customer Services.

TURNING THE APPLIANCE ON

Please note!

Before turning the appliance on, make sure the main switch on the back of the appliance is in the I position (fig. 1).

Each time the appliance is turned on, it performs an automatic preheat and rinse cycle which can- not be interrupted. The appliance is ready for use only after completion of this cycle.

Danger of burns!

During rinsing, a little hot water comes out of the coffee spouts and is collected in the drip tray un- derneath. Avoid contact with splashes of water.

• To turn the appliance on, press the

button (fig. 5). The message “Heating up... Please wait” is displayed.

After heating, the message “Rinsing...” is displa- yed. As well as heating the boiler, the appliance also heats the internal circuits by circulating hot water.

The appliance is at temperature when a message indicating the coffee taste and quantity is displa- yed.

TURNING THE APPLIANCE OFF

Each time the appliance is turned off, it performs an automatic rinse cycle which cannot be inter- rupted.

Danger of burns!

During rinsing, a little hot water flows from the coffee spouts.

Avoid contact with splashes of water.

To turn the appliance off, press the button (fig. 5). The appliance performs a rinse cycle, then the message “Turning Off Please wait...” is displayed and the appliance goes off.

Please note!

If the appliance is not used for an extended pe- riod, also place the main switch in the 0 position (fig. 6).

Important!

To avoid damaging the appliance, never place the main switch (fig. 6) in the 0 position while the appliance is on.

MENU SETTINGS

When you access the programming menu by pressing the P button, the following menu items are available:

Descale

For instructions on descaling, see page 18.

Adjust time

To adjust the time on the display, proceed as fol- lows:

1.Press the P button to enter the menu;

2.Turn the selection knob (fig. 8) until “Adjust time” is displayed;

3.Press the button (fig. 2);

4.Turn the selection knob (fig. 8) to change the hours;

5.Press the button to confirm;

6.Turn the selection knob (fig. 8) to change the minutes;

7.Press the button to confirm.

This sets the time. Press the	button to exit
the menu.

Auto-off

The appliance is set to turn off automatically if not used for 2 hours.

The time can be changed so that the appliance switches off after 15 or 30 minutes, or after 1, 2 or 3 hours.

To re-programme Auto-off, proceed as follows:

1.Press the P button to enter the menu;

2.Turn the selection knob (fig. 8) until “Auto- off” is displayed;

3.Press the button;

4.Turn the selection knob (fig. 8) until the de- sired operation time is displayed (15 or 30 minutes, or 1, 2 or 3 hours);

5.Press the button to confirm;

6.Press the button to exit the menu. Auto-off is programmed.

10