DeLonghi ECAM23.450 manual Heating Water, Making frothed milk without coffee

Please note!

•If during delivery you want to stop making milk or coffee, press the CAPPUCCINO but- ton twice.

•Do not leave the milk container out of the re- frigerator for longer than strictly necessary. The warmer the milk (5°C ideal), the poorer the froth will be.

•It is normal for steam to be given off from the metal cup tray at the end of milk delivery.

Making frothed milk (without coffee)

Proceed as described in the previous paragraph (Making cappuccino or macchiato), pressing the CAPPUCCINO button twice instead of once.

Please note!

If during delivery you want to stop making milk or coffee, press the CAPPUCCINO button once.

Preparing milk (unfrothed and without coffee) Proceed as described in the previous para- graph (Making frothed milk), turning the froth

adjustment knob to position 1 , instead of

position 2 .

Cleaning the milk frother with the CLEAN button

“Press CLEAN button” flashes on the display each time you use a milk function.

To eliminate all milk residues, proceed as fol- lows:

1.Leave the milk container in the machine (you do not need to empty it);

2.Place a cup or other recipient under the fro- thed milk spout.

3.Press the CLEAN button (fig. 33) and keep pressing until the progress bar which appe- ars on the display together with the message “Cleaning...” is complete.

Please note!

•If you are making a number of cappuccinos one after the other, you do not need to clean by pressing the CLEAN button each time you make a cappuccino. Just press it once after making the last cappuccino (the appliance can continue making cappuccino or coffee even if the CLEAN button is not pressed).

•After use, always clean the hot water/steam nozzle and the milk container as described

on page 15.

Programming the quantity of coffee and milk in the cup for cappuccino or milk

The appliance is set by default to automatically deliver standard quantities.

To change these quantities, proceed as follows:

1.Place a cup under the coffee and milk spouts.

2.Hold the CAPPUCCINO button until the mes- sage “Milk for Cappuccino Program Quanti- ty” is displayed.

3.Release the button. The appliance starts de- livering milk.

4.Once the required quantity of milk has been delivered into the cup, press the CAPPUCCI- NO button again.

5.The appliance stops delivering milk and after a few seconds the coffee is delivered into the cup. “Coffee for Cappucc. Program Quantity” is displayed.

6.Once the required quantity of coffee has been delivered into the cup, press the CAPPUCCI- NO button. Coffee delivery stops.

The machine is now reprogrammed with the new quantities.

HEATING WATER

Important! Danger of burns.

Never leave the machine unsupervised while de- livering hot water.

The spout becomes hot during delivery. Hold by the handle only.

1.Make sure the hot water spout is attached correctly (fig. 4).

2.Place a container under the spout (as close as possible to avoid splashes).

3.Press the button (fig. 2). “Hot water…” is displayed, together with a progress bar which fills gradually as preparation proce- eds.

4.The machine delivers 250 ml of hot water, then delivery stops automatically. To inter- rupt delivery of hot water manually, press

the button again.

Please note!

If “Energy Saving” mode is active, you may have

15