Cambridge SoundWorks MC630-IW, MC650-IW manual Speaker Placement, Recommended Home Theater Setup

Page 6

Speaker Placement

Placement of the speakers affects how well the AV surround system recreates the sound field intended by the recording engineer. Current recording practice typically assumes a speaker array with a center channel speaker directly in front of the central viewing position, and with left and right speakers placed so they each form a 30 degree angle from the center line. Left and right surround speakers are placed 110 degrees from the center line.

RECOMMENDED HOME

THEATER SETUP

Left and right rear speakers in a 7.1 system are typically at 140 degrees. If a single rear speaker is used in a 6.1 system, it should be centered on the rear wall. Front speakers should be as close to the height of the TV monitor as practical. Surround and rear speakers should be slightly higher. The best recreation of the desired sound field is achieved by recreating this speaker pattern as closely as your room and furnishings allow.

Don’t be too concerned if your situation and listening environment dictate somewhat different speaker positions. Most rooms do not allow ideal placement. Place your speakers as close to these guidelines as practical and the speakers will still provide convincing, lifelike sound.

Your surround processor has a variety of adjustments to optimize the sound based on the speakers’ capabilities and placement. These adjustments vary by processor, so refer to your processor’s manual for instructions specific to your equipment. Set your main, center, and surround settings to “SMALL”, with subwoofer “ON”.

Avoid placing front left and right speakers very close to a side wall (within 12-14 inches). The reflected sound from the wall degrades the sound coming directly from the speaker.

MAIN

SPEAKER

SURROUND

SPEAKER

7.1REAR SPEAKER

MAIN SPEAKERS

 

 

CENTER

CHANNEL

 

LEVEL

110º

30º

30º

110º

WITH

CENTER

 

 

SPEAKER

 

 

140º

 

 

 

140º

 

 

 

 

MAIN

SPEAKER

SURROUND

SPEAKER

POWERED

SUBWOOFER

7.1 REAR SPEAKER

-  -

Image 6
Contents Page Page Contents About This Manual IntroductionAfter Unpacking System Configuration Inspecting For DamageSpeaker Placement Recommended Home Theater SetupWiring The Speakers Preparing The WiresSpeaker Mounting Screwdriver Grille Automatic Tweeter Protection Enclosure CleaningPainting Amplifier DistortionSpecifications Case of DifficultyDimensions

MC650-IW, MC630-IW specifications

Cambridge SoundWorks has long been synonymous with high-quality audio products, and their MC630-IW and MC650-IW in-wall speakers are no exception. Designed to deliver exceptional sound quality while seamlessly integrating into any home environment, these speakers are engineered for both audiophiles and casual listeners alike.

The MC630-IW is a 6.5-inch in-wall speaker that showcases Cambridge SoundWorks' commitment to premium sound. It features a 6.5-inch polypropylene woofer that provides powerful bass response, while the 1-inch silk dome tweeter ensures clear and crisp high frequencies. The combination of these driver components results in a well-balanced sound profile suitable for any music genre or movie soundtrack. Additionally, the speaker's frequency response ranges from 50Hz to 20kHz, allowing for deep bass without sacrificing clarity in the highs.

On the other hand, the MC650-IW takes things a step further with its larger, 8-inch woofer, delivering even more depth and richness in sound. This model also incorporates a 1-inch silk dome tweeter, similar to the MC630-IW, but its enhanced driver specifications allow it to reproduce deeper bass frequencies, making it perfect for home theater setups where explosive sound effects are prevalent.

Both models incorporate Cambridge SoundWorks' proprietary design technologies, including a robust enclosure that minimizes distortion and enhances audio fidelity. This is particularly important for in-wall installations, as it helps to eliminate unwanted vibrations that can muddle sound output. Furthermore, the speakers are designed to be paintable, allowing homeowners to customize the look to match their décor.

Installation is also a breeze with the MC630-IW and MC650-IW speaker systems. Their simple mounting system ensures that they can be integrated into existing walls without hassle. Each speaker is engineered with a wide dispersion pattern that allows sound to fill the room, making them suitable for both music listening and immersive movie experiences.

Combining sleek aesthetics with cutting-edge audio technology, the Cambridge SoundWorks MC630-IW and MC650-IW in-wall speakers exemplify what modern audio design should achieve. Whether you're looking to elevate your home entertainment system or create a subtle background atmosphere, these speakers offer stellar performance that meets the demands of any audio enthusiast. Both models are powerful, versatile, and designed to deliver a superior listening experience, making them ideal choices for anyone looking to enhance their home audio setup.