Toshiba DK Backup Connection to Strata DK Via Toshiba Data Interface Units, Customer Dialer Setup

––––––––––––––––––––––––––––––––––––––––––––––Connection to Strata DK Via Toshiba Data Interface Units

Connection to Strata DK Via Toshiba

Data Interface Units

PC COM Port					Customer Strata DK
PC to Modem Type					RSSU, RSIU, TSIU,
Cable (Dealer Supplied)
			6-pair Modular Cord		WSIU or RSIS1
	(SW1-4 Off)		(Telephone type,		TTY
			cross-pinned)		Port PIOU, PIOUS 1
	Digital
			PDIU-DS (YYY)		(SW3 – TTY Position)
DK Backup/Admin	Telephone with
			PPTC25MDM	***	2
Personal Computer	PDIU-DI				PDKU
			(yellow)
	or RPCI-DI		DK Prog. 20: LED 01,	(SW1-4
	(integrated)
				Off)
Station			04 and 17 ON for PDIU-DS Port		2
DK Prog 20;	(2-pair - 1000 feet maximum, 24 AWG wire)				PDKU
LED 01, 02, and 17					3093
ON for PDIU-DI
or RPCI-DI Port	Notes	1.	Program 03 Code 41 for RSSU, PIOU, PIOU(S) slot.
			Program 03, Code 49 for RSIU Slot 11.
			Program 76-1, 76-2 for RSIU, RSIS, TSIU, or WSIU TTY Port setup.

2.Program 03 Code 62 or 64 for PDKU slot.

3.PDIU-DS Jumper plugs (P1-P9) must be set to the B-C position when connected to the TTY port.

Figure 17 DKAdmin/DKBackup PC Connected to Strata DK Via Toshiba Data Interface Units—1000 ft. Maximum

Customer Dialer Setup

♦DIU String: ATS2=43~~~ATDDYYY

(YYY is the intercom or directory number of the PDIU-DS connected to the TTY port)

Note ~~~ must be entered to send the carriage return signal following ATS2=43.

♦Modem String: (nothing)

♦After Connect String: (nothing)

To Make Connection

1.From File Menu, select Dial DK and press Enter

2.Highlight the customer form the customer list (scroll with arrow key or type initials)

3.Press F2 to establish the DIU to DIU connection. (The DIU string will be sent from the DKAdmin/DKBackup COM port.)

4.After connection is established, select desired function from the DKAdmin/DKBackup Main Menu.

5.After the DKAdmin/DKBackup session is complete, go to the File Menu and press h to hang up the connection.

131