Toshiba DK Admin manual Run DKAdmin Program, Start-up DKAdmin under Windows 98, 95 or Windows NT

Step 5: Run DKAdmin Program –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

●

●

If you upgraded an existing DKAdmin program, your customer database has been maintained in the 280ADMIN directory.

If your Config.sys file is changed and you have problems with the new file when you reboot your computer, restore the original file (i.e., Config. bak).

Step 5: Run DKAdmin Program

Note Running the program under Windows 95, 98 or Windows NT is recommended for the best performance.

Start-up DKAdmin under Windows 98, 95 or Windows NT 4.0

➤Click on the DKAdmin icon. The Toshiba Title screen displays.

Start-up DKAdmin in MS-DOS

1.From the C:\ prompt, type CD 280ADMIN and press Enter.

2.From the C:\280ADMIN prompt, type dkadmin and press Enter. The Toshiba Title screen displays.

Run DKAdmin

Note If the DKAdmin red hardware key is not installed, the following message displays: Hardware key Not Installed. Exiting to DOS. OK. Install the DKAdmin hardware key, then retry running the program.

1.Once the Toshiba Title screen displays, press any key to continue. This message appears:

Please Enter Your User ID:

2.Type Master and press Enter. This message appears: Please Enter Your

Password.

3.Type Master and press Enter. For security, your password does not display on the screen as you type it.

The default DKAdmin Password File Maintenance screen displays (shown right).

It is recommended that you change the MASTER password and create any other user passwords.

4.To change or add passwords, see “User Password Level Setup” on Page 121.

5.After completing your password setup, press Esc. The message Do You Want To Copy User File Back On The Installation Disk? displays.

12 DKAdmin/DKBackup