Toshiba DK Backup File Menu, Quick-start Procedures for Using DKAdmin, For an Existing Customer

File Menu 5

This chapter gives you step-by-step instructions on using the options available on the File Menu. The options are:

♦Select Customer

♦Maintain Customer File

♦Dial DK

♦Hangup Connection

♦Transfer DK Data

♦About

♦Exit

Quick-start Procedures for Using DKAdmin

For an Existing Customer

➤To quickly use DKAdmin with a previously programmed Strata DK

1.Create a new customer record, using the Maintain Customer File option from the File Menu.

2.Select the newly created customer, using the Select Customer option from the File Menu.

3.If you will be Uploading/Downloading data between the DKAdmin PC and a Strata DK and you must dial via modem or Toshiba DIU to connect, use the Dial DK option to select and dial the customer; or, connect the DKAdmin PC directly to the DK system (see Appendix A – Connecting to Strata DK ).

4.When the DKAdmin PC first connects to the Strata DK, verify that the selected customer processor is the same type as the one installed in the DK system. Highlight the Check Processor Type option under the Administration Menu and press Enter. Enter the applicable DK code. The Strata DK sends the processor type and version to the DKAdmin PC.

5.Back up (download) the customer’s original data using the Backup option (F2) and (F3) from the Backup/Restore Data option under the Administration Menu.

6.Update the customer DK data, using options from the Administration Menu.

7.Restore (upload) the new data to the customer’s Strata DK, using the Restore option (F2) and (F4) from the Backup/Restore Data option under the Administration Menu.

File Menu 35