Toshiba DK Admin, DK Backup Hangup Connection, Transfer DK Data, About, Exit

Hangup Connection –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
42 DKAdmin/DKBackup
3. Pressing Enter from the last field on the screen, saves the new information and returns
you to the Customer List screen. Pressing Esc, exits the screen without saving the
changes and returns you to the Customer List screen.
Hangup Connection
➤To close the DK communications link
1. Type f and the File Menu displays.
2. Type h and DKAdmin/DKBackup sends +++ ATZ H from the DKAdmin/DKBackup PC
COM port, closing the communication link to the DK.
Note The escape sequence of the modem or DIU connected to the DKAdmin/DKBackup
PC must be set as +++ using the modem command ATS2=43.
Transfer DK Data
➤To transfer DK data to a floppy disk to/from the DKAdmin/DKBackup PC hard drive database
1. From the File Menu, type
t to display the Transfer
DK Program Data screen
(shown right).
2. Enter the drive/directory
path you wish to transfer
the data from (for example,
C:\280ADMIN\XXX or
C:\280BCKUP\XXX)
and press Enter. (To
switch the drive and
directory, press F2.)
Note XXX = The customer directory. It is not necessary to add the.DK extension onto the
customer directory when transferring data or creating customers from the Maintain
Customer option.
3. Enter the drive/directory you wish to trans fe r data to (for example: A:\XXX).
4. Press Enter and follow the screen prompts to transfer the data.
5. Press Esc to close the Transfer DK Program Data dialog box.
About
➤To access the option
1. Type f and the File Menu displays.
2. Type a and a pop-up dialog box displays, listing the name of the program, the release
number and date, and the copyright date(s).
Exit
For information on exiting DKAdmin/DKBackup, see “Logging Off” on Page 33.