Toshiba DK Backup, DK Admin manual DOS Only PC from CD-ROM, Enter

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Step 4: Install DKBackup

Notes

●If you installed DKBackup for the first time, a 280BCKUP directory was created and the DKBackup files copied to it.

●If you upgraded an existing DKBackup program, your customer database has been maintained in the 280BCKUP directory.

DOS Only PC from CD-ROM

In the rare case your DOS only PC has a CD-ROM, follow these steps:

1.Insert the CD-ROM into your CD-

ROM drive. Change the DOS prompt to that drive and type: cd\dkados and press

Enter.

Type: install and press Enter.

2.Go to Step 3 of the procedure

entitled “DOS only PC from Floppy Disks” below. Disregard procedures refering to Disk #2.

CAUTION! During installation,

selecting “New Installation” overwrites the existing DKBackup customer list if you already have DKBackup or 280Backup installed on your PC. Although the customer list is overwritten, you can still retrieve the existing customer data associated to that name by adding that customer’s name using the “Maintain Customer” selection on the newly installed DKBackup. Do this for each customer name that is overwritten on the list.

DOS only PC from Floppy Disks

1.Insert the DKBackup Disk #1 into drive A: (or B:).

2.Using DOS, type: a:\install (or b:\install) at the C: prompt and press Enter.

The Toshiba Install DKBackup System screen automatically displays. Follow the prompts to install DKBackup.

3.During installation, if you have an existing customer file in an older version of DKBackup (280Backup) on your PC, highlight the DKBackup 4.0 Upgrade Installation Only selection and press Enter.

...or if you are installing for the first time, highlight the DKBackup 4.0 New Installation selection and press Enter.

CAUTION! During installation, selecting “New Installation” overwrites the existing DKBackup customer list if you already have DKBackup or 280Backup installed on your PC. Although the customer list is overwritten, you can still retrieve the existing customer data associated to that name by adding that customer’s name using the “Maintain Customer” selection on the newly installed DKBackup. Do this for each customer name that is overwritten on the list.

4.Remove the floppy disk from your floppy disk drive and reset the PC to initialize the changes made during installation.

5.Go to Step 3 in the “Run DKBackup” on Page 22.

Installing DKBackup 21