Toshiba DK Backup, DK Admin Isdn Programs R4 Only, To access Isdn Programs, To edit Isdn programs

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– ISDN Programs (R4 Only)

ISDN Programs (R4 Only)

Note This option cannot be used by Strata DK Release 3 or earlier.

The Integrated Services Digital Network (ISDN) Programs option in the Administration Menu enables you to maintain ISDN programs.

Release 4.0 provides the Primary Rate Interface (PRI) ISDN capabilities. Release 4.1/4.2 will introduce the ISDN Basic Rate Interface (BRI). PRI features apply to the following Release 4 processors: RCTUBA3/BB4, RCTUC3/D4, and RCTUE3/F4. Like T1, ISDN PRI is not supported on the RCTUA4 small system processor.

➤To access ISDN Programs

➤From the Administration Menu, type i. The ISDN Programs screen displays (shown right).

➤To edit ISDN programs

1.Highlight the program number and press F3. The Edit Program screen displays. The screen varies, depending upon the program selected.

Note You can also use the Find function to quickly move to a program by typing the first digit of the program number. DKAdmin highlights the first program number matching the entry.

2.Highlight the field you wish to change and enter the information. Read only fields do not accept entries.

3.Press F9 to save the entries and upload the data to the DK, or F10 to save the ISDN assignments and return to the ISDN Programs screen.

Important! The DKAdmin PC must be connected to the Strata DK to upload any changes to this data (see Appendix A – Connecting to Strata DK for procedures on connecting the DKAdmin PC to a Strata DK).

4.Press the Esc key to close the ISDN Programs screen and return to the Administration Menu.

➤To use the Strata DK’s program files to edit

1.Press F2 and the DK Code dialog box displays.

2.Type the DK Code: XXXX, where XXXX is the DK level 1 security code set in Program 00. The DK System Program File screen displays.

Administration Menu (DKAdmin) 97