–––––––––––––––––––––––––––––––––––––––––––––––––– Upgrading Strata DK Systems to DK424 Release 4.0

5.Using a small screwdriver, carefully remove the four ROMs or flash memory (see Figure 30).

6.Replace with the equivalent ROMs or flash memory in the upgrade kit. Peel the labels (two locations) off the card.

Designates Front of Chip

(back)

Turn Very Gently

 

(front)

IC Socket Mounted on

Processor's PCB

Front Direction Marker

Silk-screened on PCB

CAUTION! Be careful not to break the IC socket or scratch the PCB trace.

Do Not Break

IC Socket

Do Not Scratch PCB

2514

Figure 30 ROM Removal

7. Re-install the RRCS DTMF PCB, if required.

Note If there are battery straps on the PCB, make sure that they are placed in the “on” position for the processor card(s) to avoid losing your data.

8.Re-insert the processor card(s), reconnect the ribbon cables and MOH connection, if necessary. If an RSIU card is being added, shift the card positions accordingly, add the RSIU PCB in slot 11 and change the ribbon cable to connect the RCTU PCB(s) to the RSIU.

Note any changes needed to accommodate the displaced card, if necessary. If this creates extensive changes, it may be better to upgrade without adding the RSIU, get the system working, and then adjust the card positions to add the RSIU card.

9.Turn the Strata DK system back on and follow the DKAdmin/DKBackup instruction screens for completing the upgrade.

Upgrading Strata DK Systems to DK424 Release 4.0

153

Page 163
Image 163
Toshiba DK Backup, DK Admin manual 153, ROM Removal