Toshiba DK Backup Security Maintenance Section, To limit the Strata DK programs a user may edit

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Security Maintenance Section

Security Maintenance Section

The Security Maintenance Section option (level 9 password required to access this option) enables you to set up to three levels of security using:

♦Passwords - defines the functions available to users using menu-specific passwords as described on Page 121.

♦Program Access - defines the programs which can be used by each password level using the Security Maintenance Section option (see “Program Security (Default Levels)” on Page 78).

♦DK Access Code - must be entered to enable a user to send and/or receive data to/from a Strata DK. The default for this code is 0000 and may be changed (but not viewed) by DKAdmin users that have an allowable password level.

➤To limit the Strata DK programs a user may edit

1.From the Administration Menu, type u to display the DK Program Security Maintenance screen (shown right).

The screen lists the Strata DK programs available for programming or updating. You can limit programs a user can access by assigning a security

level (which corresponds to the users assigned password level).

Note Program access security limits direct access of programs when using the Program Administration Section Option. When using the ACD Administration Section Option, only Programs 01, 02, 04, *09, VMID, MWID, and Personal Speed Dial access can be denied from the normal System/Station Administration functions.

2.Highlight the S/L field of the desired program. Type the password level (0 ~ 9, 9=highest) you want to assign for accessing the program and press Enter.

Note For a complete list of Password/Program default levels, see “Program Security (Default Levels)” on Page 78.

...or

to assign all the programs to a particular password level, press F2-reset. A Security Level dialog box displays. Type the password level (0 ~ 9, 9=highest) you want to assign to all the Strata DK programs and press Enter. A confirmation message displays. Highlight Yes and press Enter.

The Security Level for all programs are changed to the entered password level.

3. To close the DK Program Security Maintenance screen, press Esc.

Administration Menu (DKAdmin) 77