Toshiba DK Backup, DK Admin manual 159

–––––––––––––––––––––––––––––––––––––––––––––––––– DK424 Release 4.0 Upgrade Programming Example

If the DID Intercept Destination is the Kitchen Telephone (PDN 107), data in this program must not be changed to adjust for port shifting caused by the RDDU DID line PCB in slot 13. This is because Port 007 did not shift after the upgrade (see Figures 33 and 34):

Program *17 data for DID lines 001~004 before the upgrade = 007

Program *17 data for DID lines 001~004 after the upgrade = 007

Program 20

If the Front Office Telephone (PDN 112) is equipped with an RPCI-DI to display DNIS and Caller ID on a PC running a TAPI application, the data in Program 20 must shift. This enables the Front Office Telephone and RPCI to operate the same way after the upgrade as it did before. Notice that all Program 20 data for port 012 moves port to 008.

	Before the Upgrade	After the Upgrade
Port 008	LED17 on, all others off (Program 20	LED 01,02,10, 11, and 17 on, all
	default)	others off
Port 012	LED 01,02,10, 11, and 17 on, all	LED17 on, all others off
	others off

Program 30

If the Back Room Telephone (PDN 119) is programmed to dial forced and verified Account codes when making outside calls, the data in Program 30 must shift. This is to allow the Back Room Telephone to operate the same way after the upgrade as it did before. Notice that all Program 30 data for port 019 moves to port 015.

	Before the Upgrade	After the Upgrade
Port 015	LED 01, 05, and 07 ON, all others off	LED 01, 05, 07, 08, and 14 ON, all
	(Program 30 default)	others off
Port 019	LED 01, 05, 07, 08, and14 on, all	LED 01, 05, and 07 on, all others off
	others off	(Program 30 default)

Program 33

If the Front Office telephone (DN 112) is programmed to hunt to the Back Room Telephone (PDN 119), the data in Program 33 must shift:

Before the Upgrade	After the Upgrade
Hunt-From Port 012 to Port 019	Hunt-From Port 008 to Port 015

If the Front Office telephone (PDN112) is programmed to hunt to the Lobby Telephone (PDN 100), the data in Program 33 must shift:

Before the Upgrade	After the Upgrade
Hunt-From Port 012 to Port 000	Hunt-From Port 008 to Port 000

Upgrading Strata DK Systems to DK424 Release 4.0 159