Toshiba DK Backup, DK Admin manual 103

––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– Restore Data

Notes

●When you back up PRGALL, the DK security code, set in the DKBackup customer database, is not sent to the processor. You must always enter the DK security code that is actually programmed on the processor installed in the Strata DK. You can change the DK security code using the DKAdmin Program Administration Section option or manually using the programming telephone.

●Access to the DK Code should be considered highly confidential and only given to those individuals with the security level which enables them to program or update DK data. If changing the Strata DK Program 00 Passwords, always change both Level 1 and 2 for security. DKAdmin/DKBackup checks both codes and run with either code.

●After you enter the DK Code, the computer will display the DK System Program File list is displayed (see screen in Step 3 below). If this screen does not display, the DKAdmin/ DKBackup PC and the Strata DK are not communicating. See Appendix A – Connecting to Strata DK to verify that the PC COM port is connected to the Strata DK PIOU, RSSU, RSIS, RSIU or PIOUS TTY port, or IMDU or RMDS modems.

●Make sure the programming telephone (station 205 or 213) is not in the programming mode if communications are not established.

3. After entering the DK code, the following screen displays.

	DK System Program File
PRGALL	All System Programs
REPALL	All Station and System Speed Dial Numbers
NAMEALL	All User Names
VIDALL	All Voice Mail ID Codes (#656)
MIDALL	All Voice Mail Message Waiting Codes (#657)
ADMEMOAL	All Station and System Speed Dial Memos
MSGALL	All Station and System LCD Messages
CFAALL	Directory Number Call Forwarding settings (R3)
MWALL	All Message Waiting Settings (R3)
CLID	All Class/ANI Lost Call Number Storage Data (R3)

Note If the PC and Strata DK do not communicate, the Problem: Unable to Establish Communications screen appears. Follow the instructions on the screen and/or see Appendix A – Connecting to Strata DK to correct the problem.

4.Highlight the program file you wish to restore and press the spacebar to tag (checkmark) the program file. Repeat this step for as many program files as you wish to restore. Press F2 to tag all files.

CAUTION! Do not restore the PRGALL file while the system is in use. Restoring the file, interrupts service by blanking out [DNs] temporarily.

5.After selecting the files, press F4. The pop-up window shown below displays. If you are changing ROMs/Flash Memory or PCBs, follow the instructions on the screens to add or change PCBs and reset the Strata DK communications port.

If you are changing from a PIOU/PIOUS/RSSU to a RSIU or RSIS, you are able to increase the DKAdmin/DKBackup PC COM port baud rate (for example, from 1200 to 9600).

Backup Menu (DKBackup) 103