Upgrade
Important!
When using DKAdmin/DKBackup, the following list provides important information regarding specific programs:
●Program 00: DKAdmin/DKBackup does not upgrade the DK security codes in Program
●Program 03: On new or upgraded installations, Program 03 should always be checked and updated using DKAdmin Program Administration Section option or manually from the programming telephone to make sure all PCB slots have the correct codes for PCBs and PCB options. Strata DK power must be turned off (five seconds) and then on after uploading (restoring) Program 03 to enable its data to take effect.
●Programs 04, *04 and *09: When uploading these programs, DKAdmin/DKBackup downloads them from the processor, compares and arranges data in an acceptable order and uploads the data to the Strata DK.
●When upgrading processors, [DNs] that are not programmed or do not exist on the original processor in Programs 04, *04, *09, and
CAUTION! ACD/DID assignments in Program *09 cannot be restored (uploaded) with early ROM versions of Strata DK Release 2 ROMs; they must be restored using the programming telephone. ROM,
Strata DK Release 3 Added Features: Strata DK Release 3 enables you to backup and restore Station Call Forward and Message Waiting status. However, when you upgrade from Strata DK Release 1 or 2 to Release 3, Call Forward and Message Waiting data are lost.
When upgrading from Strata DK, Release 3 to Release 3.10 or higher, station Call Forward, Message Waiting, and Lost ANI/Caller ID data are saved and restored from the original processor to the new processor.
CLID: To restore lost call number data, stations must have memory allocated in Program *51.
Important! When backing up or upgrading Strata DK Release 1 Processors: The original release of Strata DK software version
Toshiba recommends using an
Release 1 processors (shipped between June 1993 and August 1993) may fail during the download process. It may be necessary to download individual files
114 | DKAdmin/DKBackup |
