Toshiba DK Backup Using DKAdmin/DKBackup, Before You Start, Logging On, To log on to DKAdmin

Using DKAdmin/DKBackup 4

This chapter shows you how to log on and off DKAdmin/DKBackup, use the pull-down menus and select system options, respond to system and error messages, and describes the keyboard conventions used in the programs.

Before You Start

Before using DKAdmin/DKBackup, you must:

♦Connect your personal computer to a Strata DK in order to send/receive data between the DKAdmin/DKBackup PC and a Strata DK (see Appendix A – Connecting to Strata DK for procedures).

♦Properly install the DKAdmin/DKBackup hardware key (see Chapter 2 – Installing DKAdmin and Chapter 3 – Installing DKBackup for procedures).

♦Correctly set your communications (see Chapter 8 – Options Menu ).

Logging On

DKAdmin

➤To log on to DKAdmin

1.After powering up your computer, at the C:\ prompt type CD 280ADMIN and press Enter.

2.From the C:\280ADMIN prompt, type dkadmin and press Enter. The Toshiba start-up page displays (shown right).

3.Type your User ID and press Enter.

4.Type your password and press Enter.

Using DKAdmin/DKBackup 27