DK424 Release 4.0 Upgrade Programming Example –––––––––––––––––––––––––––––––––––––––––––––––––––

Program *33

If the Back Room telephone (PDN 119) is programmed as the Owner of PhDN 500, the data in Program *33 must shift:

Before the Upgrade

After the Upgrade

PhDN Port 500 is owned by Port 019

PhDN Port 500 is owned by Port 015

 

 

Programs 39, 29, *29, and 59

When a port number shifts from XXX to YYY during an Release 4.0 upgrade, the following Program changes must be made:

In Program 39, the data set for port XXX must be copied over the data set for port YYY.

In all Telephone/Console button programs, the appearances of the XXX port PDN/SDN Button (##XXX) and DSS Button (#XXX) must be changed to ##YYY and #YYY, respectively, on all keystrips.

Example: The Front Office Telephone changes from port 012 to port 008 during the Release 4.0 upgrade (see Figures 33 and 34).

As shown below, all the button functions of the Front Office Telephone do not change after the upgrade, but the Program 39 codes for PDN, SDN and DSS buttons change if the associated PDN/SDN or DSS port shifts. Also PhDN, Speed Dial, and Feature button codes do not change when ports shift.

10-Button Keystrip for Front Office

Telephone on Port 012 -Before Upgrade

Key No.

Code

Name

K10

497

SDS

 

 

 

K09

498

DND

 

 

 

K08

*103

SD103

 

 

 

K07

*102

SD102

 

 

 

K06

*101

SD101

 

 

 

K05

#017

DSS117

 

 

 

K04

##500

PhDN 500

 

 

 

K03

##019

SDN 119

 

 

 

K02

#000

DSS100

 

 

 

K01

##012

PDN 112

 

 

 

10-Button Keystrip for Front Office Telephone on Port 008 -After Upgrade

Key No.

Code

Name

K10

497

SDS

 

 

 

K09

498

DND

 

 

 

K08

*103

SD103

 

 

 

K07

*102

SD102

 

 

 

K06

*101

SD101

 

 

 

K05

#013

DSS117

 

 

 

K04

##500

PhDN 500

 

 

 

K03

##015

SDN 119

 

 

 

K02

#000

DSS100

 

 

 

K01

##008

PDN 112

 

 

 

Programs *42-1 and *42-2

Although this example does not include an RDTU (T1) PCB, it should be noted that these programs require an RDTU slot number entry with DK Release 4.0. DK Admin/DK Backup automatically inserts the correct slot number for these programs during the upgrade process.

160

DKAdmin/DKBackup

Page 170
Image 170
Toshiba DK Admin, DK Backup manual 160, Program *33