Toshiba DK Admin, DK Backup manual Wmau

Maintain Customer File ––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Table 2	Customer File Maintenance Screen Fields (continued)
Field		Description
After Connect		Enter the After Connect String when calling into a Strata DK modem pool (see
		Figure 20 on Page 135). It is recommended that you enter AT~~~ATDDYYY as
		the After Connect string (where YYY is the extension number of the PDIU-DS
		connected to the Strata DK TTY port).

	Notes
	● If you are not using the modem pool function, the DK security code can be set
	on the After Connect line in each Customer File setup so it will be sent
	automatically to the Strata DK after connecting the DKAdmin/DKBackup PC to
	the Strata DK remotely via modems. Setting the DK security code in the After
	Connect String is optional.
	● In some cases, when connecting to older Release 1 processors or during heavy
	traffic conditions, the After Connect string may be sent and not recognized by
	the Strata DK. If this should occur, do not enter the DK security code in the After
	Connect string.
DK Model, Release	Press Enter and the DK Model, Release dialog box appears. Highlight the
	appropriate processor type and software release number and press Enter.
		DK14,		WMAU,	R1
		DK16e,		TMAU ,	R1
		DK40,		TMAU,	R1
		DK	,	RCTU-A,	R1/R2
		DK	,	RCTU-A,	R3.1
		DK	,	RCTU-A,	R4
		DK	,	RCTU-B,	R1/R2
		DK	,	RCTU-B,	R3
		DK	,	RCTU-B,	R4
		DK	,	RCTU-CD,	R1/R2
		DK	,	RCTU-CD,	R3
		DK	,	RCTU-CD,	R4
		DK	,	RCTU-EF,	R3
		DK	,	RCTU-EF,	R4
	Important!
	● For proper operation, be sure you select the appropriate software release.
	● If creating a new customer to upgrade a processor, select the current release
	level (i.e., if upgrading from RCTUB2, select Release 2).
	● To upgrade a Release 1 or Release 2 processor to Release 3 or Release 3.10,
	select Release 1 or 2; the upgrade process converts this line to Release 3.
	● To upgrade Release 3 to Release 3.10 processors, select Release 3.
Data Directory	The customer directory automatically defaults to the assigned customer ID. You
	may change the directory as desired. This is the directory in which all customer
	data is stored on the DKAdmin/DKBackup PC disk drive. DKAdmin/DKBackup
	automatically adds the “.DK” extension on the end of the directory.

38 DKAdmin/DKBackup