––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– E911/CAMA Trunk Programs (R4 Only)

The Strata DK16e and DK424 accomplishes this with a special interface between the KSU and the CO. This special interface takes the station number information and sends it through the public network in a format compatible with the central E911 database. This special interface is required in addition to sending software within the Strata DK16e and DK424. The required interface is an external device (Telident or Proctor) that interfaces with up to two analog station ports.

Programs *10-11 and *10-12 assign which RSTU, KSTU2, RDSU, PSTU, or PESU standard telephone ports are connected to the E911 interface unit. Program 04 Directory Number data must be blank for E911 RSTU-KSTU2 ports.

Program *10-91 assigns the time allowed to dial each digit after dialing 9 when using the E911 feature. This time will affect the time that LCR or CO Line dial tone is returned when dialing

9.However, a user can dial a 9+ (non-911) calls normally before receiving LCR or CO line dial tone and the DK will route the call appropriately.

Program *10-92 assigns the time the DK will wait before sending the Station [PDN] to the E911 SLT port after the E911 SLT port answers.

To access E911/CAMA Trunk Programs using RMCU/RCMS CAMA trunks

From the Administration Menu, type 9. The E911/ CAMA Trunk Programs screen displays (shown right).

To edit E911/CAMA trunk programs

1.Highlight the program number and press F3. The Edit Program screen displays. The screen varies, depending upon the program selected.

Note You can also use the Find function to quickly move to a program by typing the first digit of the program number. DKAdmin highlights the first program number matching the entry.

2.Highlight the field you wish to change and enter the information. Read only fields do not accept entries.

3.Press F9 to save the entries and upload the data to the DK, or F10 to save the E911/ CAMA trunk assignments and return to the E911/CAMA Trunk Programs screen.

Important! The DKAdmin PC must be connected to the Strata DK to upload any changes to this data (see Appendix A – Connecting to Strata DK for procedures on connecting the DKAdmin PC to a Strata DK).

4.Press the Esc key to close the E911/CAMA Trunk Programs screen and return to the Administration Menu.

Administration Menu (DKAdmin)

95

Page 105
Image 105
Toshiba DK Backup, DK Admin manual To edit E911/CAMA trunk programs