System Installation –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

To select printer

1.Type p. The Printout Destination Selection Matrix screen displays (shown right).

2.Highlight the appropriate printer destination and press the spacebar. The highlighter moves to the Printer field.

3.Press F2. The Available Printer Drivers dialog box displays.

4.Scroll the printer list using the up/down arrow keys, or type the first letter of your printer to “jump” to the printer selections which begin with that letter. For example, if you have a Hewlett-Packard Laserjet printer, type h and the screen scrolls to the beginning of the Hewlett-Packard printers.

5.Highlight your selection and press Enter. The Printout Destination Selection Matrix screen displays again.

6.Press Enter and the System Installation Submenu displays.

System Miscellaneous Variables

The System Miscellaneous Variables option (available to password levels 8 and 9) enables you to control various system functions and conventions by changing the default entry.

To change system variables

1.Type m. The System Miscellaneous Variables pop-up displays (shown right).

2.Use the Enter or up/ down arrow keys to move from field to field. Press the spacebar to toggle between Yes and No.

Confirm Entries

When set to No, as you complete an input field (using

 

all the available field characters), the cursor

 

automatically moves to the next field. When set to Yes,

 

you must press the Enter key after field input to move

 

to the next field.

Bell On

When set to Yes, as you complete all the available

 

characters of an input field, a beep sounds.

120

DKAdmin/DKBackup

Page 130
Image 130
Toshiba DK Admin, DK Backup manual System Miscellaneous Variables, 120