Toshiba DK Backup, DK Admin manual To view CO line assignments, To assign speed dial assignments

–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– System/Station Administration

4.Press Ctrl+F2 again. A pop-up dialog box displays (shown at right).

5.Type the desired ports and press Enter. Another pop-up dialog box displays asking you confirm the change.

6.Highlight Yes and press Enter to make the change or No to cancel the changes.

7.Press F10 to save the changes you just made.

CO Line Assignments (F6)

➤To view CO line assignments

1.Press F6 from the Port Attributes screen. The Port CO Line Information screen displays (shown right).

2.To turn any program on/off, highlight the program number for the CO Line and press the spacebar. A check mark indicates the program is on.

3.Press Esc to return to the Port Attributes screen.

Speed Dial Assignments (F7)

➤To assign speed dial assignments

➤Press F7 from the Port Attributes screen. The Port Speed Dial Numbers & Memos screen displays (shown right). Refer to Page 68 for procedures.

Administration Menu (DKAdmin) 55