Toshiba DK Admin, DK Backup manual To view or change flexible button assignments

System/Station Administration –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

Flexible Button Assignments (F5)

➤To view or change flexible button assignments

1.Press F5 from the Port Attributes screen and the Port Flexible Key Assignments screen displays (shown right).

2.To change a flexible button assignment, highlight the Flexible Key Assignment and press:

♦F5–Pause to deactivate or blank out a key assignment.

♦F9–Increment SD to add multiple speed dial key assignments.

Important! You can only use this key when you are assigning more than one speed dial key at a time. If you have not just added a speed dial key assignment, the message Must Assign System/Station Speed Dial First displays.

If you leave the cursor in the same field and continue to press F8, the speed dial key number increments. To add consecutive speed dial key assignments, you must continue to highlight the next field before pressing F8.

3. Press Esc to return to the Port Attributes screen.

Important!

●After restoring flexible keys (Program 39) data, turn the DK system off for five seconds, then turn it back on to apply the changes made.

●If you change the keystrip type (Program 38) from the station attribute screen, all keystrip buttons will be set to Program 38 default assignments. If you wish to change a keystrip type (from 20 to 10, for example) and save the existing (first 10) key button assignments, operate Program 38 from the Program Administration Section option.

➤To copy selected keys to selected ports

1.Press Ctrl+F2 and a pop-up dialog box displays (shown at right).

2.Press any key to continue.

3.Highlight a key and press the spacebar to select. An asterisk appears next to your selection. Continue until all the keys you want to copy have been selected.

54 DKAdmin/DKBackup