Toshiba DK Admin, DK Backup manual See Appendix a Connecting to Strata DK

System/Station Administration –––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––

♦

♦

Press the spacebar to toggle between available options, or enable (indicated by a check mark)/disable (indicated by a blank) the attribute.

Enter a value.

4. Press F10 to save the changed data to the customer database file.

Note After saving the data, press F9 to update the Strata DK with the changes. The

		DKAdmin PC must be connected to the Strata DK to upload changes to port attributes
		(see Appendix A – Connecting to Strata DK ).
Table 3	Attribute Definitions
Attribute		Description
Telephone		Four default telephone button arrangements are provided. Changing the keystrip type
Keystrip Type		writes/overwrites existing button assignments.
Ring Tone		Distinctive system ringing sends a different ring tone for CO (loop, DID, or ground) line
		ringing than that for intercom, tie ringing. In addition, CO line (loop or ground) ringing can
		be different from one telephone to another.
Volume Level		This program sets the initial off-hook volume level for each digital telephone handset and/
		or headset.
Speakerphone		Any electronic or digital full speakerphone operation can be disabled by assignment with
Enabled		this program. If disabled, a speakerphone will act as a handsfree electronic or digital
		telephone. Initialized data enables all speakerphones.
MIC Key Lock		An electronic or digital telephone microphone can be turned on or off by using the Mic
Enabled		button. A button lock operation enables an alternate action Push On/Push Off of the Mic
		button.
MIC on at Start		The microphone, as well as the MIC LED, can be selected to be on or off at the start of a
of Call		call if the Push On/Push Off mode is chosen.
Call Pkup		If ON, a station or group of stations (Pickup Group) can pick up a call that is ringing
On=AC, Off=		another stations’s [PDN] or [PhDN], a call placed on hold at another station and other
AC, GP & STA		types of calls.
Speed Dial		A station may be denied the use of Speed Dial (Station and System) with this program.
Allowed
ABR Access		The ABR feature can be enabled or denied for each station. The system selects the last
Enabled		line in the originating line group each time ABR is initiated.
OCA/Busy		A busy digital or electronic telephone can receive a second voice communication on
Override		intercom via Handsfree Answerback if the OCA feature is installed. If a calling station does
Automatic		not have an automatic function, the user must dial an extra digit of 2 after hearing busy
		tone in order to gain access to OCA.
Forced Account		If this feature is selected, a station or Direct Inward System Access (DISA) CO line user
Code		using a line with a Forced Account requirement must enter an Account Code before the
		call can be completed.
Change TR		If selected for this feature, a station can change Toll Restriction (TR) override codes.
Override Code
Change DISA		This enables a selected station to change the DISA security code.
Security Code
SLT		SLT Hookflash Anti-Bounce Guard (LED 12 ON) in Program 30 prevents false recalls due
ANTI-Bounce		to hookflash bounce during SLT hang-up on outside calls.
Account Codes		If the system is set for Verified Account Codes in Program 69, station users must enter
Verified		specific codes when entering Forced or Voluntary Account Codes.

50 DKAdmin/DKBackup