Toshiba DK Backup, DK Admin manual 133

–––––––––––––––––––––––––––––––––––––––––––––––––––––––– Voice Call Transferred to Modem Connection

5.After the DKAdmin/DKBackup session is complete, go to the File Menu and press h to hang up the connection.

Voice Call Transferred to Modem Connection (Strata DK IMDU, RMDS, or External Modem)

					PPTC25MDM	Customer Strata DK
DK Backup/Admin				3-Pair Modular	(yellow)
		(Telephone type, cross-pinned)				TTY	PIOU / PIOUS
Personal Computer
		PC to Modem Type		RS-232	Line		IMDU Modem
		Cable (Dealer Supplied)				RSTU	SW3, or RSIU
		CO Line		Public	External Modem2		/RMDS modem2
			Telephone			RCOU
	Remote		Network
					CO Line
	Modem1					PDKU
		External modem must have the following AT				Port
Standard		commands set:					0921
		(S0=1, B1,E0,L2,M1,Q1,V1,X4,Y0,&C1,&D2, &G0)
Telephone
		Turn off data compression.					Digital
Voice Path
Data Path							Telephone

Notes 1. External or Built-in to PC. Turn off data compression.

2.Either IMDU, RMDS, or External modem can be used to connect remotely. If IMDU is used, put SW3 in the Modem position; if an External modem is used, put SW3 in the TTY position. Refer to Progams 76 and 77-1 to setup RMDS modem.

Figure 19 DKAdmin/DKBackup PC Modem Connected to Strata DK System Built-in IMDU, RMDS (or External Modem) Voice Call First, then Modem to Modem Connection

Communication Setup

(See Communication Setup in Chapter 8 – Options Menu .)

♦Use default values for direct modem init. If using a fax/modem, you may have to include &Q6 or &K0 into the modem initialization string to turn off data compression.

♦Direct modem initialization should be: Default.

Customer Dialer Setup

♦DIU string: (nothing)

♦Modem string: ATX3 D

Note For some 14.4 or 28.8 fax modems, you may have to enter AT&Q6X3 D.

♦ After connect string: DK Security Code (optional)

133