–––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––– System/Station Administration

System LCD Messages (F8)

To set or change available system LCD messages

Note You may create up to 40 system messages which may be used by all LCD telephone ports. Each message may contain two lines using up to 32 characters.

1.From the System/Station Administration Screen, press F8. The System Messages screen displays (shown right).

2.Highlight the Message Line 1 field and type the message you wish displayed on the first message line of the LCD.

3.Highlight the Message Line 2 field and type the

message you wish displayed on the second message line of the LCD.

4.Press F10 to save the message assignments and return to the Station Administration screen.

Station Port Attributes (Ctrl Enter)

To program or update individual station port attributes

1.On the System/Station Administration Screen, highlight the port you wish to program and press Ctrl+Enter. The Port Attributes screen displays (shown right).

This screen lists all the features available for an individual telephone. Additionally, you can view CO Line

information, or assign personal Speed Dial and LCD Messages to this telephone. The definitions of each program item are listed in Table 3 on Page 50.

2.Highlight the Attribute field.

Note Pay close attention to the message bar at the bottom of the screen. It will tell you what options are available for each program.

3. Depending on the attribute you can either:

Administration Menu (DKAdmin)

49

Page 59
Image 59
Toshiba DK Backup, DK Admin manual System LCD Messages F8, Station Port Attributes Ctrl Enter