Silvercrest 600 B26 manual Wall mounting, Cleaning

Page 13

Wall mounting

2 plugs and 2 screws are supplied to enable the wall bracket w to be mounted.

WARNING RISK OF ELECTRIC SHOCK!

Before mounting the wall bracket w check whether there are any power cables or pipes in the wall!

1)Mark the positions for the drill holes using the wall bracket w.

2)Bore the holes with a 6 mm drill.

3)Insert the dowels into the drill holes.

4)Position both the openings of the wall-holder w over the drill holes and then fix it tightly using both screws.

Cleaning

WARNING RISK OF ELECTRIC SHOCK!

Before you start to clean the hand blender, ALWAYS unplug the appliance from the mains power socket.

Under no circumstances may the motor unit 4 be cleaned by immersing it in water or holding it under running water.

WARNING - RISK OF PHYSICAL INJURY!

To avoid injuries, exercise caution when handling the extremely sharp blade 7. Reassemble the liquidiser after use and cleaning to prevent injury from the exposed blade. Keep the blade out of the reach of children.

WARNING - PROPERTY DAMAGE!

DO NOT clean the accessories of your hand blender in the dishwasher as it may cause damage to them.

Do not use aggressive, chemical or abrasive cleaning agents! They could irreparably damage the upper surfaces!

GB

IE

SSMS 600 B2

11

Image 13
Contents Hand Blender Set Operating instructions Hand Blender Set Ssms 600 B2Ssms 600 B2 Index Intended use Information for these operating instructionsCopyright Risk of Electric Shock Safety instructionsDisposal of the packaging Items suppliedDescription of appliance / Accessories Technical dataUtilisation Assembling Assembling the wire whiskTo assemble the hand blender Assembling the liquidiserHolding the appliance Operation Amount Wall mounting CleaningImporter Disposal of the applianceService WarrantyCream of Vegetable Soup RecipesPumpkin Soup Sweet Fruit Spread Mayonnaise Chocolate Cream