Caring For Your Mixer
Cleaning Your Mixer
To clean the mixer, turn off and unplug from outlet, wipe the mixer head, stand and turntable with a damp cloth, then dry. DO NOT IMMERSE THE STAND MIXER IN WATER. Avoid the use of abrasive cleaners, as they may damage the finish of the mixer. Wash the beaters and bowls in hot, soapy water after each use. Rinse thoroughly and dry. Beaters and bowls may also be washed in an automatic dishwasher.
Storing Your Mixer
Store the mixer in a dry location, such as on a countertop or table top, or in a closet or cupboard. Insert the beaters into the proper sockets. Place the dough hooks and other attachments in the mixing bowl. Store the bowl(s) on the turntable. Wind the electric cord into a coil, then secure it with a twist fastener.
Maintenance
The motor of your stand mixer has been carefully lubricated at the factory and does not require any additional lubricant. Other than the recommended cleaning, no further user maintenance should be necessary.
For servicing or repairs please contact Consumer Services for assistance.
Helpful Hints
•When mixing liquids, especially hot liquid, make small quantities at a time to reduce spillage.
•Ingredients should be added to the mixing bowl as they are specified in the recipe.
•Use the mixing speed that is recommended in the recipe. Use the speed control dial of the mixer to help you find the correct speed to use.
•If times are specified in the recipe, use them! BE CAREFUL NOT TO
OVERMIX. Overmixing can cause the mixture to become very tough.
•Should an object, such as a spatula, fall into the bowl while the mixer is operating, turn the mixer OFF immediately, then, remove the object.
•For easier
•Mixer is designed to be
•Mixer turntable will come shipped placed in the correct hole for use with the large mixing bowl which is included.