Oster 3157 instruction manual Instructions for USE, Before Using Your Juice Extractor

INSTRUCTIONS FOR USE

BEFORE USING YOUR JUICE EXTRACTOR

Follow the assembling instructions listed below before using your Oster® Juice Extractor:

Figure 1

Figure 2

•Before you start assembling your juice extractor, make sure it is unplugged and it is placed on a dry and level surface

•Place filter basket on top of the motor base (Figure 1)

•Place the stainless steel filter on top of the filter basket pushing down and turning it until it fits into the grooves of the motor shaft (Figure 2)

•Place juicer cover/lid on top of the filter basket (Figure 3)

•Raise the safety locking arms, then lower them to securely fit into the grooves in the lid and then firmly press lower part of the locking arms into the unit ensuring they lock the lid into the unit (Figure 4)

•Place the pulp container into position by tilting it slightly (Figure 5)

Important: Make sure Pulp Container edge is underneath basket

•Place the 600 mL jar under the spout located on the right hand side of the juicer by tilting it slightly. Other jars or glasses can be used as well (Figure 6)

Figure 3

Figure 5

Figure 4

Figure 6

4