Oster OSTER VERSA PERFORMANCE BLENDER Welcome, Learning About Your Product Features and Assembly

SAVE THESE INSTRUCTIONS

This product is for household use only.

•The maximum rating marked on the product is based on the attachment that draws the greatest load. Other attachments may draw less power.

Welcome

Congratulations on your purchase of your Oster® Versa® Performance Blender. If you have any comments, questions or inquiries about this revolutionary product, please call 1-800-334-0759.

Learning About Your Product Features and Assembly

Power Cord Instructions:

Please follow the instructions below to ensure the safe use of the power cord.

•The Oster® Versa® Performance Blender comes equipped with a three-prong (grounding) plug. If you do not have a three-prong outlet, you can use with an adapter to be able to use with a standard 3-prong grounded plug. Do not cut or remove the third prong from the plug on the power cord.

•Try to position the blender near the power source to reduce the hazards associated with power cords (such as becoming entangled or tripping over a long power cord).

•Do not pull, twist or otherwise abuse the power cord.

•Do not wrap the power cord around the main body of the blender during or after use.

•Do not use an extension cord with this product.

This symbol has been placed in specific areas of the User Guide portion of this book. Its purpose is to help you easily identify instructions that require your special attention.

1. Filler Cap – 2 oz / 60 ml filler cap
	doubles as a measuring cup. Align
	notch with the hole to insert in lid;
	turn clockwise to secure in place.
	Remove from lid to add ingredients
	while blending.
2.	Lid (Flap goes on opposite side of pour
	spout) – Seals the jar.
3.	Jar & Blade Assembly – 64 oz / 2L
	BPA-free plastic jar with permanently
	attached blade assembly.
4.	Jar Sensor - Unit will not operate unless
	the jar is fully seated on base and the jar
	sensor is engaged.
5.	Control Panel – Includes speed dial, 3
	programmed settings and pulse.
6.	Power Cord – 3-prong power cord.
7.	Fuse – Incorporated to protect the motor
	from overheating. If the motor shuts off
	while in use: Turn control knob to “Off”

1 2

3

4

D

3-PRONG GROUNDED PLUG

This appliance must be grounded while in use to protect the operator from electric shock. This product is for use on 120 volts. The cord has a plug (A) as shown. An adapter (C) (not included) is available for connecting three- blade grounding-type plugs to two-slot receptacles (B). The green grounding lug extending from the adapter must be connected to a permanent ground such as a properly grounded outlet box. The adapter should not be used if a three-slot grounded receptacle is available.

DO NOT ATTEMPT TO MODIFY THIS PLUG OR DEFEAT THIS SAFETY FEATURE IN ANY WAY.

	and unplug from the wall. Remove
	jar from base and free blade of any
	obstructions. Wait 30-45 minutes for
	the unit to cool. Press external resettable
	fuse button on the bottom of the base.
8.	Cord Storage – Space on the bottom of
	the base to store the cord while not in use.
9.	Tamper – After blending has started,
	remove the filler cap and place the tamper
	through the opening in the lid to assist
	with pushing the food down to the blade.
	Note – the tamper is not long enough to
	reach the blade.

5

6

7

8

9

4

Before you use the product for the first time, separate the Tamper, Lid, Filler Cap, and Jar. Wash in warm, soapy water. Rinse and dry well.

5

BLSTVB-RV0-000_13EFSM1 P.indd 5-6

5/17/13 9:51 AM