1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
PURÉE | CHOP | MIX | PULSE | LIQUEFY | MILKSHAKE | SMOOTHIE | ICE CRUSH |
LOW 
HIGH 
Using Your Blender
1.Clean blender according to the instructions in the “Cleaning and Storing Your Blender” section.
2.Turn jar upside down so the small opening is at the top. (Figure 1)
3.Place sealing ring over jar opening. (Figure 2)
4.Place blade into jar. (Figure 3)
Figure 1 | Figure 2 | Figure 3 |
5.Place Threaded Bottom Cap onto jar. Turn the Threaded Bottom Cap clockwise to tighten. (Figure 4)
6.Place jar assembly onto base. (Figure 5)
7.Line up tabs of jar with tabs on blender base. Make sure jar is seated into position. (Figure 6)
|
| Pulse |
|
| Ice Crush |
Figure 4 | Figure 5 | Figure 6 |
4