To Use The Pulse Setting
The “PULSE” button momentarily activates the blender at HIGH speed. You may also continuously touch the “PULSE” button to pulse as desired.
•To Pulse, press the “PULSE” button to activate a momentary high speed.
The blender will run at high speed as long as you press the button. The motor will stop when you stop pressing the button.
Blending Tips
• Working with Hot Foods or Liquids:
(!!)WARNING: When you work with HOT
FOODS, flip the jar lid open to vent steam.
Partially cover the opening keeping hands and other exposed skin away from the lid opening to prevent possible burns. (Figure 6)
(!!)WARNING: When you work with HOT LIQUIDS, flip the jar lid open and start at a low speed, and gradually increase to a faster
speed. Do not add liquid over the 2 cup (.5L) level. Always keep hands and exposed skin away from steam. Start blending at lowest speed. (Figure 6)
• Put liquids in the jar first, unless a recipe says otherwise.
•Crushing ice: Crush approximately 3 cups of ice at a time with 2 cups of liquid for optimal results.
•Do not remove the lid while in use. Flip the jar lid open to add smaller ingredients. (Figure 6)
•This blender has been designed to gently process foods when operating at low speeds. If blades do not rotate during operation, simply choose a higher speed.
•This blender will not mash potatoes, whip egg whites or substitute dairy toppings, mix stiff dough or grind raw meat.
Cleaning and Storing Your Blender
IMPORTANT: Unplug Before Cleaning Base And Do Not Immerse The Blender Base In Water Or Any Other Liquids.
Use a damp, soft sponge with mild detergent to clean the outside of the blender base and control panel. All parts except for the blender base are dishwasher safe. Place sealing ring in bottom basket of dishwasher. You can also wash the parts in warm, soapy water. Rinse well and dry.
6