Track Scan
Press the TR SCN button 3 to sequentially sample the first 10 seconds of all tracks on the CD. During the track scan the display shows:
TRACK DISC IN
10 SCAN
The track number is flashing.
Press the TR SCN button 3 again to stop scanning and listen to the current track.
Track Repeat
Press the TR RPT button 4 to replay the current track. The track repeat will be confirmed by the following display:
TRACK | DISC IN |
05 | RPT |
|
|
Press the button TR RPT 4 again to stop the repeating or press button ; <TUNE/ TRACK> to go to the next or previous (refer to section headed 'Track Selection' elsewhere in this handbook).
Random Play
When this feature is selected, all tracks on the CD will be played randomly.
To switch on the random play, press
TR RDM button 5 during CD playback. Random play will be confirmed by the following display:
TRACK RDM | DISC IN |
12 CD
To switch off the random play press the TR RDM button 5 again during CD playback.
If button ; <TUNE/TRACK> is pressed whilst in random play mode, the next random selection will play.
Once all tracks on the CD have been randomly played, the display will show 'RANDOM RPT' and the CD will be randomly played again.
CD Eject
Press the 
button 1 to eject the CD.
The radio will display 'EJECT CD' then revert to radio mode.
If the CD is not removed within 10 seconds of being ejected, it is automatically reloaded into CD player again (to protect the CD from accidental damage). In this case, the radio will remain in radio mode.
The display shows the symbol 'DISC IN'.
Please note:
It is possible to eject the CD when the car's ignition is turned off.
Stopping CD playback
Press the the button AM/FM 9 briefly to stop CD playback and resume in radio mode or press the button ON : to switch the radio off.
Error Messages from the CD Deck
In some cases it may happen that the deck is not able to play or load a specific CD. Then the following error messages are shown in the display:
CD ERROR
1.'CD ERROR' (after CD loading): A CD is caught in the deck mechanism.
2.'CD ERROR' (during CD playback): The deck mechanism is too hot. Allow the CD deck to cool down before resuming operation.
3.'CD ERROR' (constantly after selecting CD mode): Internal control error.
9