Audio Menu Adjustment
Press the volume control > to activate and select audio menu.
When any of the audio menu (Bass/Treble/ Fader/Balance) is on the display, you can select the next menu by pressing the button O E once or as many times as required.
Increase or decrease the setting by pressing the button + C or - D.
Additional Features
Speed dependent volume control
The speed dependent volume control adjusts the volume depending on the vehicle speed. As the vehicle increases in speed, the volume of the radio also increases to compensate for the associated speed noises.
Please note:
This feature will not always compensate for the driving noise. There are other variable factors such as road surface, wind noise, windows open, engine speed etc. that may alter the interior noise for any given road speed.
For this reason there are five different levels of compensation available to allow you to find the level of compensation that best suits your average driving conditions.
You can select the compensation curves between 0 (off) and 5 (maximum compensa- tion) as follows:
1.Press button LOC 7 for at least 3 seconds until you hear a confirmation beep (no beep if 'BEEP OFF' previously set). The display shows the current setting, for eg.
2.Press tuning buttons (;) within
8 seconds to select the desired setting between
3.To store the selected setting, press button LOC 7 again for at least 3 seconds until you hear a confirmation beep (no beep if 'BEEP OFF' previously set).
SD-VOL 2
Display during setting for speed dependent volume control.
If you don't store the new setting within
8 seconds after the last press of a button, it will not be stored. To turn this feature off, select and save
12