Local on, Radio, Selecting Waveband

Treble

Press the audio selector (Volume knob) twice, to select the Treble mode. This will be confirmed on the display by 'TREBLE' with the current setting. While in this mode, turn the selector knob clockwise or anti- clockwise to adjust the treble to the desired level. After 2 seconds the display will return to the former mode.

Radio

Selecting Waveband

AM Band:

Press AM/FM button 9 to select AM band.

FM Band:

Press AM/FM button 9 to select FM band or to switch between FM1, FM2 and AM.

AM 1017

Station on AM Band

FM 105.9

Station on FM Band

Stereo Broadcast:

When a stereo broadcast is received on FM, the stereo indicator ' ' appears in the display. In case of poor field-strength the radio automatically switches to mono but the ' ' indicator may still be shown on the display.

Tuning-in a station

You can tune-in stations in different ways:

•Automatic seek

•Manual seek

•Auto-store (AS)

Automatic Seek Tuning

This function seeks radio stations automatically. Press button SEEK>> < to automatically select the next higher frequency radio station. Press button <<SEEK < to automatically select the next lower frequency radio station. During this operation, the radio is muted. As the radio can seek weak and noisy distant radio stations, it is recommended to switch the radio to 'local' mode.

To do this, press LOC button 7. The current mode ('LOCAL ON' or 'LOCAL OFF') is displayed. Press the LOC button 7 again to switch between 'LOCAL ON' or 'LOCAL OFF' mode.

LOCAL ON

•In LOCAL ON mode, the radio will first search for strong stations. If no strong station can be found it will search for any receivable station.

•In LOCAL OFF mode the radio will search for any receivable station (useful in areas where there are no strong stations).

The LOCAL ON/OFF setting does not affect the AS function (refer to section 'Automatic Storing' elsewhere in this handbook).