Audiovox XMB10 manual FCC Regulations

Page 4

FCC Regulations

This unit complies with the interference limits relative to a Class B digital device, applicable under Part 15 of the FCC Rules regarding installation in a residential environment. If the unit is not installed in accordance with these instructions, it could cause harmful interference to audio or television reception.

If this condition persists after corrective action, consult your dealer or experienced installation facility.

Cautions and Warnings

1.Within the home, do not install the Boom Box in a position that obstructs viewing of any home entertainment component, such as Television, or stereo system indicators and displays.

2.Do not install or use the XMB10 in locations exposed to direct sunlight, or in areas subject to extreme temperatures; do not operate the unit in moist areas, in rain, or in areas adjacent to water such as pools, hot tubs, etc.

3.When outdoors, position the XMB10 and antenna where there are no obvious satellite signal obstructions such as high terrain, trees, overhangs, etc.

4.When installed indoors, unplug the AC Power Adapter from the wall outlet when the XMB10 is not to be used for an extended period of time. If batteries are installed, set the Power On/Off-VOL control to the Off position to prevent unintentional battery discharge, or remove the batteries.

5.To avoid possible damage to the Receiver Boom Box caused by battery leakage, it is recommended that the batteries be removed when the Boom Box is not being used for an extended period of time.

6.Do not install or place the XMB10 on an inclined or unstable surface.

7.By adhering to these warnings and safety considerations, serious accidents and/or personal injury can be avoided.

-4-

128-7546

4 of 16

Image 4
Contents Xpress Satellite Radio Receiver Contents Congratulations FCC Regulations Contents XMB10 Antenna Installation/Wiring PrecautionsSetting Up and Installing Your Kit Boom Box XMB10 ControlsVolume +/- Pushbuttons Increase or decrease Battery Installation Cabling InterconnectionsRemoving the Receiver From the XMB10 Installing the Antenna Interconnect DiagramAntenna Placement Considerations Positioning the XM Antenna 128-7546 Specifications Cleaning the XMB10 Boom Box MaintenancePeriodic Inspection Troubleshooting Fault Probable Remedy CauseMonth Limited Warranty 128-7546