Audiovox Contents XMB10 Antenna, Installation/Wiring Precautions, Boom Box XMB10 Controls

Page 5

Contents XMB10 Antenna

Users Guide

(P/N 118-1155)

 

P/N 128-7546

 

AC/DC Power Adapter

 

(P/N 136-3990)

1 pc.

1 pc.

 

1 pc.

XMB10 Boom Box

(P/N 144-2484)

1 pc.

Installation/Wiring Precautions

1.If using the adapter, make sure the adapter cable is not connected to an AC wall outlet until all inter- connections have been made and verified. The adapter power cable should be connected last.

2.Incorrect installation may cause damage to the system.

3.For antenna positioning, refer to the Antenna Aiming procedure outlined in the Xpress XM® Satellite Radio Receiver User Guide, 128-7454.

Setting Up and Installing Your Kit

NOTE: The XM® signal can be received and pro- cessed virtually anywhere as long as there are no obvious satellite signal obstructions such as high terrain, trees, overhangs, etc.

In placing the antenna, therefore, these factors must be taken into account .

Boom Box XMB10 Controls

The Xpress XM® Boom Box XMB10 provides Power ON/OFF and VOLUME +/- pushbuttons. A power-on LED

-5-

128-7546

5 of 16

Image 5
Contents Xpress Satellite Radio Receiver Contents Congratulations FCC Regulations Installation/Wiring Precautions Contents XMB10 AntennaSetting Up and Installing Your Kit Boom Box XMB10 ControlsVolume +/- Pushbuttons Increase or decrease Cabling Interconnections Battery InstallationRemoving the Receiver From the XMB10 Antenna Placement Considerations Interconnect DiagramInstalling the Antenna Positioning the XM Antenna 128-7546 Specifications Periodic Inspection MaintenanceCleaning the XMB10 Boom Box Fault Probable Remedy Cause TroubleshootingMonth Limited Warranty 128-7546