b. After making sure the connectors and guide pin hole are properly lined up, gently lower the Xpress into the mounting plate, and press down on the Xpress to mate the connectors together. The raised detent on the mounting plate will enter the notch on the
rear of the Receiver, indicating the Xpress is properly seated. The receiver should now be attached securely to the mounting plate.
c. Apply power to the XMB10 by pressing the Power ON/OFF button; the LED indicator lights blue. If the Receiver does not turn on at the same time,
press the Power On/Off ( 
) button on the Receiver front panel.
4. Removing the Receiver From the XMB10
Press the EJECT button on top of the Boom Box; the receiver will swing out automatically. Gently grasp each side of the Receiver at the top and pull straight up to disengage it from the mounting plate.
INSTALLING/REMOVING | PUSH IN AT TOP TO | Xpress |
THE Xpress RECEIVER | SECURE IN PLACE | RECEIVER |
|
| INSTALLED |
8 of 16