Black & Decker FP1000 manual To Puree, Food Chute/Cover, Food Pusher, Food Fingers

D

E

F

G

To Puree:

The pre-cut feature eliminates the need to cut foods into small pieces before pureeing. Simply install the knife Blade in the Bowl, then grasp the thick slice disc by the Centre Hub and align hexagon shape of Hub over hexagon top of Knife Blade (E). Install the Cover. Insert the food into the Food Chute and using the pusher, pureeing can be achieved in one easy step.

Food Chute/Cover

Hold the Cover by the Food Chute with the handle cover at an angle to the Bowl just in front of the Bowl Handle

(F). Lower the Cover over the Bowl and twist counter- clockwise until it snaps firmly in place. Proper alignment will result with the handle cover over the Bowl Handle. If the Lid does not easily rotate to the Lock position, check to ensure the Bowl is fully rotated to the Lock position.

NOTE: If the Processor does not operate when it is turned on, be sure the Bowl and Cover are properly “locked“ into position. To remove the Cover, shut the Food Processor off and wait until the Disc has stopped rotating. Turn the Cover clockwise and lift the Cover off.

Food Pusher

Insert the Food Pusher into the Food Chute and lower it into place (G). Always use the Food Pusher to guide food through the Disc when slicing and shredding.

NOTE: The Food Pusher doubles as a measuring cup and has convenient millilitre and cup markings.

Food Fingers

To keep the food steady and minimize tilting of single- food items (such as carrots), clip the Food Fingers into place on the top rim of the Food Chute (H).

Center the food in front of the Food Fingers. They will press against the food and hold it in place. Insert the Pusher, press down, and process.

PUSH BUTTON CONTROLS “On” Indicator Light

This light comes on when the On Switch has been acti- vated even if the Bowl and Cover have not been locked into place. If the Indicator is on before you close the Lid, press the Off Button and then rotate the lid to the Lock position.