Black & Decker CM9050C manual SNEAK-A-CUPINTERUPT Feature, Brewing 1 4 Cups, Started

Note: You must set display clock in order to use Delayed Brewing feature.

12. Once coffee grounds have cooled, carefully open brew basket lid and using

12:00

F

3.To change time, press HOUR (HR) button until correct time appears (F).

Note: When time passes noon, a small icon appears in bottom right corner of digital display to let you know you are in P.M. time. If P.M. indicator is not illuminated, time is A.M.

basket handle, remove and discard used grounds and paper filter (if used).

Close brew basket lid.

13. Coffeemaker will keep brewed coffee hot for 2 hours and then automatically

turn off.

14. To turn off coffeemaker at any time, press I/O (ON/OFF) button.

15. Unplug appliance when not in use.

SNEAK-A-CUP®INTERUPT FEATURE

12:15

G

4.Repeat with MINUTE (MIN) button (G). (If minute setting is not changed within 5 seconds, clock will revert to default time and selection of hour and minute must be repeated.)

Tip: Hold buttons down to make hours and minutes change rapidly after a short delay. To change the time in 1-digit increments, press and release buttons.

The Sneak-A-Cup®interrupt feature allows you to pour a cup of coffee from the carafe while coffee is brewing. When carafe is removed, brewing process is paused. Simply replace carafe on the carafe plate within 30 seconds and brewing resumes.

Note: If the carafe is not replaced within 30 seconds the brew basket may overflow.

ADJUSTABLE KEEP WARM CARAFE PLATE

Note: If coffeemaker is unplugged or power is interrupted even momentarily, display time may need to be reset.

BREWING COFFEE

Note: It is not necessary to set the clock to brew coffee unless you want to use Delayed Brewing feature.

1. Open water reservoir lid.

2. Fill water reservoir with desired amount of cold tap

water using water markings on front of reservoir. Do not

1.Once coffee has brewed, press KEEP WARM button to select desired holding temperature of adjustable keep warm carafe plate.

2.Temperature range is from 1 (lowest temp) to 7 (highest temp).

3.When button is pressed, number “4” (medium temp) will appear in digital display.

4.Press HOUR (HR) button to increase setting and MINUTE (MIN) button to decrease set temperature.

BREWING 1 – 4 CUPS

exceed 12-cup maximum level (H). Close lid on water

reservoir.

3. If desired, place an 8 to 12 cup basket style paper filter

H	into the removable brew basket, making sure filter is
	centered in brew basket. Otherwise, simply use and
	center your permanent gold tone filter.

4. Add desired amount of ground coffee.

6:00

K

When brewing small amounts of coffee, press the 1 – 4 CUPS button. CUP icon will appear on left side of digital display (K).

5.	Insert brew basket into brew basket holder following directions in GETTING
	STARTED.
6.	Close brew basket lid.
7.	Place brew-thru lid on empty carafe.

Note: Coffee may overflow if brew-thru lid is not properly aligned.

8.Place empty carafe on adjustable temperature keep warm carafe plate.

9.Plug cord into standard electrical outlet.

10.Press power I/O (ON/OFF) button; power light is

L

DELAYED BREWING

TIME SINCE BREWED FEATURE

To check freshness of brewed coffee, press and hold TIME SINCE BREWED button. The visual display will indicate how long ago last brewing was completed. When button is released, normal time display will appear. This feature will function until coffeemaker is manually turned off or after 2 hours when coffeemaker automatically turns off (L).

illuminated. Brewing begins OR, to delay brewing, set auto function before pressing the power ON/OFF button (see DELAYED BREWING) (J).

	11.When coffee stops flowing into carafe, brew cycle is
J	complete.

1.Follow steps 1 through 9 under BREWING COFFEE.

2.Make sure clock has been set to correct time of day.

3.Press PROGRAM (PROG) button; clock icon appears on left side of digital display.

4.Digital clock displays 12:00 or previous preset delayed brewing start time.

7 8