38: CHO>FLANGER (ChorusFlanger)

This effect connects a chorus and a flanger in series.

fig.MFX-38

 

 

 

 

Balance D

 

Balance D

L in

 

 

 

 

 

 

 

 

 

 

 

 

 

L out

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Balance W

 

Feedback

 

 

 

 

 

 

 

Balance W

 

 

 

Chorus

 

 

 

 

 

Flanger

 

Balance W

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Balance W

 

 

 

R in

 

 

 

 

 

 

 

 

 

 

 

 

 

R out

 

 

Balance D

 

 

 

 

 

 

 

 

Balance D

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Parameter

 

Value

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cho Delay

 

0.0–100 [ms]

Adjusts the time delay from

 

 

 

 

 

 

 

 

 

 

when the direct sound begins

 

 

 

 

 

 

 

 

 

 

until the chorus sound is heard.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cho Rate

 

0.05–10.00 [Hz]

Adjusts the modulation speed of

 

 

 

 

 

 

 

 

 

 

the chorus effect.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cho Depth

 

0–127

Adjusts the modulation depth of

 

 

 

 

 

 

 

 

 

 

the chorus effect.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cho Balance #

 

D100:0W–

Adjusts the volume balance be-

 

 

 

 

 

D0:100W

tween the direct sound and the

 

 

 

 

 

 

 

 

 

 

chorus sound.

 

 

 

 

 

 

 

 

 

 

With a setting of “D100:0W,” only

 

 

 

 

 

 

 

 

 

 

the direct sound will be output.

 

 

 

 

 

 

 

 

 

 

With a setting of “D0:100W,” only

 

 

 

 

 

 

 

 

 

 

the chorus sound will be output.

Flg Delay

 

0.0–100 [ms]

Adjusts the time delay from

 

 

 

 

 

 

 

 

 

 

when the direct sound begins

 

 

 

 

 

 

 

 

 

 

until the flanger sound is heard.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Flg Rate

 

0.05–10.00 [Hz]

Adjusts the modulation speed of

 

 

 

 

 

 

 

 

 

 

the flanger effect.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Flg Depth

 

0–127

Adjusts the modulation depth of

 

 

 

 

 

 

 

 

 

 

the flanger effect.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Flg Feedback

 

-98– +98 [%]

Adjusts the proportion (%) of

 

 

 

 

 

 

 

 

 

 

the flanger sound that is fed

 

 

 

 

 

 

 

 

 

 

back into the effect.

 

 

 

 

 

 

 

 

 

 

Negative (-) settings will invert

 

 

 

 

 

 

 

 

 

 

the phase.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Flg Balance #

 

D100:0W–

Adjusts the volume balance be-

 

 

 

 

 

D0:100W

tween the chorus sound and the

 

 

 

 

 

 

 

 

 

 

chorus sound that is passed

 

 

 

 

 

 

 

 

 

 

through the flanger.

 

 

 

 

 

 

 

 

 

 

With a setting of “D100:0W,” only

 

 

 

 

 

 

 

 

 

 

the chorus sound will be output.

 

 

 

 

 

 

 

 

 

 

With a setting of “D0:100W,” only

 

 

 

 

 

 

 

 

 

 

the chorus sound that passes

 

 

 

 

 

 

 

 

 

 

through the flanger will be output.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Level

 

0–127

Adjusts the output level.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

39: CHORUS/DELAY

This effect connects a chorus and a delay in parallel. The parameters are the same as for “36: CHORUS>DELAY.” However, the Dly Balance parameter adjusts the volume balance between the direct sound and the delay sound.

fig.MFX-39

 

 

Balance D

L in

L out

 

Chorus

 

Balance W

 

Feedback

 

Balance W

 

Delay

R in

R out

 

Balance D

Adding effects

40: FLG/DELAY (Flanger/Delay)

This effect connects a flanger and a delay in parallel. The parameters are the same as for “37: FLG>DELAY.” However, the Dly Balance parameter adjusts the volume balance between the direct sound and the delay sound.

41:CHO/FLANGER (Chorus/ Flanger)

This effect connects a chorus and a flanger in parallel. The parameters are the same as for “38: CHO>FLANGER.” However, the Flanger Balance parameter adjusts the volume balance between the direct sound and the flanger sound.

fig.MFX-41

 

Balance D

L in

L out

 

Chorus

 

Balance W

 

Feedback

 

Balance W

 

Flanger

R in

R out

 

Balance D

42: LOFI

This effect intentionally degrades the audio quality to simulate a Lo- Fi sound. It is particularly effective on drums.

fig.MFX-42

 

 

 

 

 

 

 

L in

 

 

 

 

 

 

 

L out

 

 

Lo-Fi

 

 

2-Band EQ

 

 

 

 

 

R in

 

 

 

 

 

 

 

R out

 

 

 

 

 

 

 

 

 

Lo-Fi

 

 

2-Band EQ

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Parameter

Value

Description

 

 

 

 

 

 

 

 

 

Bit Down

 

0–11

This setting lowers the audio

 

 

 

 

 

 

 

quality.

 

 

 

 

 

 

 

 

The audio quality will worsen as

 

 

 

 

 

 

 

this setting is increased.

S-RateDown

0–7

This coarsens the output signal.

 

 

 

 

 

 

 

The sound will become coarser

 

 

 

 

 

 

 

as this setting is increased.

 

 

 

 

 

 

 

 

 

Post Gain

 

0, +6, +12, +18

Adjusts the output signal.

 

 

 

 

[dB]

 

 

 

 

 

 

 

 

 

 

 

 

Low Gain

 

-15– +15 [dB]

Adjusts the gain of the low fre-

 

 

 

 

 

 

 

quency.

 

 

 

 

 

 

 

 

 

 

High Gain

 

-15– +15 [dB]

Adjusts the gain of the high fre-

 

 

 

 

 

 

 

quency.

 

 

 

 

 

 

 

 

 

 

Output

 

MONO, STE-

Specifies how the sound will be

 

 

 

 

REO

output.

 

 

 

 

 

 

 

 

With a setting of “MONO,” the

 

 

 

 

 

 

 

output sound will be monaural.

Level #

 

0–127

Specifies the output volume

 

 

 

 

 

 

 

from the Lo-Fi effect.

Effects

83

Page 83
Image 83
Roland JUNO-D Choflanger Chorus→Flanger, Chorus/Delay, 40 FLG/DELAY Flanger/Delay, 41 CHO/FLANGER Chorus/ Flanger, Lofi