33: ENH>CHORUS (EnhancerChorus)

This effect connects an enhancer and a chorus in series.

fig.MFX-33

L in

 

 

Enhancer

 

 

 

 

 

 

 

L out

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mix

 

 

 

Balance D

 

 

 

 

 

 

 

 

 

 

 

 

Balance W

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Chorus

 

 

Balance W

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

R in

 

 

 

 

 

 

 

 

 

 

R out

 

 

Enhancer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mix

 

Balance D

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Parameter

Value

Description

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Enhancer Sens #

0–127

Adjusts the sensitivity of the en-

 

 

 

 

 

 

 

 

hancer.

Enhancer Mix

0–127

Adjusts the ratio with which the

 

 

 

 

 

 

 

 

overtones generated by the en-

 

 

 

 

 

 

 

 

hancer are combined with the

 

 

 

 

 

 

 

 

direct sound.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Cho Delay

0.0–100 [ms]

Adjusts the time delay from

 

 

 

 

 

 

 

 

when the direct sound begins

 

 

 

 

 

 

 

 

until the chorus sound is heard.

Cho Rate

0.05–10.00 [Hz]

Adjusts the modulation speed of

 

 

 

 

 

 

 

 

the chorus effect.

Cho Depth

0–127

Adjusts the modulation depth of

 

 

 

 

 

 

 

 

the chorus effect.

Cho Balance #

D100:0W–

Adjusts the volume balance be-

 

 

 

 

D0:100W

tween the enhancer sound that

 

 

 

 

 

 

 

 

is sent through the chorus and

 

 

 

 

 

 

 

 

the enhancer sound that is not

 

 

 

 

 

 

 

 

sent through the chorus.

 

 

 

 

 

 

 

 

With a setting of “D100:0W,”

 

 

 

 

 

 

 

 

only the enhancer sound will be

 

 

 

 

 

 

 

 

output. With a setting of

 

 

 

 

 

 

 

 

“D0:100W,” only the enhancer

 

 

 

 

 

 

 

 

sound that is sent through the

 

 

 

 

 

 

 

 

chorus will be output.

Level

 

0–127

Adjusts the output level.

34: ENH>FLANGER (EnhancerFlanger)

This effect connects an enhancer and a flanger in series.

Adding effects

Parameter

Value

Description

 

 

 

Flg Feedback

-98– +98 [%]

Adjusts the proportion (%) of

 

 

the flanger sound that is fed

 

 

back into the effect.

 

 

Negative (-) settings will invert

 

 

the phase.

 

 

 

Flg Balance #

D100:0W–

Adjusts the volume balance be-

 

D0:100W

tween the enhancer sound that

 

 

is sent through the flanger and

 

 

the enhancer sound that is not

 

 

sent through the flanger.

 

 

With a setting of “D100:0W,”

 

 

only the enhancer sound will be

 

 

output. With a setting of

 

 

“D0:100W,” only the enhancer

 

 

sound that is sent through the

 

 

flanger will be output.

 

 

 

Level

0–127

Adjusts the output level.

 

 

 

35: ENH>DELAY (EnhancerDelay)

This effect connects an enhancer and a delay in series.

fig.MFX-35

L in

 

 

 

 

 

 

 

 

 

L out

 

 

 

 

Enhancer

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Mix

 

 

Balance D

 

 

 

 

 

 

 

 

 

 

 

Balance W

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Delay

 

 

 

 

 

 

 

 

 

 

 

 

 

Balance W

 

 

 

 

 

 

 

 

 

 

Feedback

 

 

R in

 

 

Enhancer

 

 

 

 

 

R out

 

 

 

 

 

 

 

Mix

 

Balance D

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Parameter

Value

Description

 

 

 

 

 

 

 

 

 

 

 

 

Enhancer Sens #

0–127

Adjusts the sensitivity of the en-

 

 

 

 

 

 

 

hancer.

 

 

 

 

 

 

 

 

 

 

 

 

Enhancer Mix

0–127

Adjusts the ratio with which the

 

 

 

 

 

 

 

overtones generated by the en-

 

 

 

 

 

 

 

hancer are combined with the

 

 

 

 

 

 

 

direct sound.

 

 

 

 

 

 

 

 

 

 

 

 

Delay Time

0–500 [ms]

Adjusts the time delay from

 

 

 

 

 

 

 

when the direct sound begins

 

 

 

 

 

 

 

until the delay sound is heard.

 

 

 

 

 

 

 

 

 

 

 

 

Dly Feedback

98– +98 [%]

Adjusts the proportion (%) of

 

 

 

 

 

 

 

the delay sound that is fed back

fig.MFX-34

L in Enhancer

Mix

R in Enhancer

Mix

Balance D

L out

Feedback

Balance W

Flanger

Balance W

R out

Balance D

 

into the delay input.

 

Negative (-) settings will invert

 

the phase.

 

 

Dly HF Damp 200–8000 [Hz],

Adjusts the frequency above

BYPASS

which delayed sound fed back

 

to the delay input will be cut.

 

If you do not want to cut the

 

high frequencies of the delay

 

feedback, set this parameter to

 

BYPASS.

Parameter

Value

Description

 

 

 

Enhancer Sens #

0–127

Adjusts the sensitivity of the en-

 

 

hancer.

 

 

 

Enhancer Mix

0–127

Adjusts the ratio with which the

 

 

overtones generated by the en-

 

 

hancer are combined with the

 

 

direct sound.

 

 

 

Flg Delay

0.0–100 [ms]

Adjusts the time delay from

 

 

when the direct sound begins

 

 

until the flanger sound is heard.

 

 

 

Flg Rate

0.05–10.00 [Hz]

Adjusts the modulation speed of

 

 

the flanger effect.

 

 

 

Flg Depth

0–127

Adjusts the modulation depth of

 

 

the flanger effect.

Dly Balance #

D100:0W–

Adjusts the volume balance be-

 

 

D0:100W

tween the enhancer sound that

 

 

 

is sent through the delay and the

 

 

 

enhancer sound that is not sent

 

 

 

through the delay.

 

 

 

 

 

 

With a setting of “D100:0W,”

 

 

 

only the enhancer sound will be

 

 

 

output. With a setting of

Effects

 

 

“D0:100W,” only the enhancer

 

 

sound that is sent through the

 

 

delay will be output.

 

 

 

 

 

Level

0–12

Adjusts the output level.

 

 

 

 

 

 

 

81

Page 81
Image 81
Roland JUNO-D owner manual Enhchorus Enhancer→Chorus, Enhflanger Enhancer→Flanger, Enhdelay Enhancer→Delay